CityXplorer North America 2012.20 (all the CityXplorers in one file

**vanish90** · 16th August 2011, 01:27 AM

CityXplorer North America 2012.20 (all the CityXplorers in one file)

With cityXplorer maps you can access all the information you need to get around the city you're visiting on foot or public transport .
If you're visiting a new city on holiday or business, a cityXplorer map downloaded to your nüvi helps you get around just like a local. The enhanced pedestrian mode gives you walking directions, including footpaths and shortcuts through parks, with landmarks indicated along the way. The public transport mode tells you where to catch trains, buses and tubes (where relevant) and how long it will take to reach your destination. cityXplorer public transport timetables ensure you arrive at the station on time and don't have to wait too long for your connection.

This file added to your CityNavigator North America 2012.20 will allow you to use pedestrians features and public transports in every big city in NA.
This file will add CXs features to 32 cities in your GPS , many CXS in just one small file

to unlock add an *.unl made with Jetmouse kg. for FID 800 to enhance ped.features and public (NO PID 2 IS NEEDED)
to use this file user should have CNAM NT 2012.20 in his/her nuvi .

cityXplorer NA 2012.20.rar (8,6 MB)
[Only registered and activated users can see links. ]

--------------------------------------------------------------------------------------------------------------------------------------------

COMPLETE MAP, you can use it alone in your gps, no CNNAM 2012.20 needed

to unlock add an *.unl made with Jetmouse kg. for FID 800 to enhance ped.features and public transports (NO PID 2 IS NEEDED)

full 2012.20 fid 800 CXNA.rar (284,5 MB)

These 2 files will work in every CX compatible devices
compatible devices list here

Code:

Please Login or Register to see the links

**jakasmon** · 16th August 2011, 03:06 AM

Awesome .. didn't know that I could use the maps created for 3700 series with FID 800 on my 14xx device. Now I realize what Catymag was trying to tell me in the other thread :-)

**arvind09** · 23rd August 2011, 12:30 PM

In My Oregon 550 can if I put this file in the same folder which contains NA 2012.20 will it work . . . and can i just unlock it with Fast unlocker V2.1 instead of creating a .UNL file and putting it in the same folder.Would it again still work

**catymag** · 23rd August 2011, 01:12 PM

Oregon will see it like some CNNA parts (cities) coz it doesnt support CXs features-
So just a double map if you already have CNA, useless-
read
[Only registered and activated users can see links. ]

cityXplorer matrix

**pcgzf** · 23rd August 2011, 06:52 PM

Thank you for the files and your instructions. Worked on my 1490t. For those who are still confused, my procedures are as follows:

1) Download the two img files (cityXplorer NA 2012.20.img and CXNA.img) from the links above.
2) Download Jetmouse keygen from this post:
[Only registered and activated users can see links. ]
3) Run the keygen, enter your unit ID, select "custom mapset" from the second dropdown menu, enter 800 in FID box
4) Press OK and then the second Generate button on the main program
5) Save the generated code as cityXplorer NA 2012.20.unl
6) Place all three files to the Map folder of your microSD card (SD:\Map)
7) Voila

This is my first attempt at unlocking a Garmin map. If there are any missteps, please feel free to correct me. Thanks to all who have contributed.

**AaronAbasolo** · 26th August 2011, 04:09 PM

Can you please give a megaupload.com link? Our company blocks multiupload.com access.

**catymag** · 26th August 2011, 05:09 PM

first file(small cx) [Only registered and activated users can see links. ]
second file (big cx) [Only registered and activated users can see links. ]

**vvsp** · 27th August 2011, 05:49 AM

Thank you very much for your step by step instruction. However, please advise:
1) how to save .unl file?
2) should I put all those 3 files to the folder: \Garmin or to \Maps or to \Garmin\Maps?
3) how do I know it works or not after I complete install this CityXplore?

**bam-bam** · 27th August 2011, 08:51 AM

create unl
[Only registered and activated users can see links. ]
use one of the file
small one + to use this file user should have CNAM NT 2012.20 in his/her nuvi .
or completed map - big one .... COMPLETE MAP, you can use it alone in your gps, no CNNAM 2012.20 needed

If the map is correctly unlocked , starting ,your nuvi will ask if you want to abilitate CX features and you'll have this in your nuvi transportation mode menu ...
[Only registered and activated users can see links. ]

**pcgzf** · 27th August 2011, 11:22 PM

Please see my reply in between your texts.

Originally Posted by vvsp

1) how to save .unl file?
Create an empty file on your computer. Give it a name with a unl extension (cityXplorer NA 2012.20.unl in this scenario). Copy and paste the generated code inside the empty file. Save the file.

2) should I put all those 3 files to the folder: \Garmin or to \Maps or to \Garmin\Maps?
The three files will go to SD:\Map folder. On a side note, City Navigator North America map and junction view file will go to SD:\Garmin and SD:\Garmin\JCV folders, respectively.

3) how do I know it works or not after I complete install this CityXplore?
Move (or copy and paste) the three files from your computer to the (micro)SD card and insert the card to your Garmin device. Turn the device on. If done successfully, you will see a message informing you of the availability of CityXplorer map on your device and that your can start using the pedestrian mode.

Thread: CityXplorer North America 2012.20 (all the CityXplorers in one file

Thread Tools

Display

CityXplorer North America 2012.20 (all the CityXplorers in one file

Advertissements

Bookmarks

Bookmarks

Posting Permissions