Garmin City Navigator Europe NT 2011.32 Mapsource + Regions IMGs

**lolypop000** · 27th January 2011, 03:51 PM

CN 2011.40 comming today [Only registered and activated users can see links. ]

**Kaluluka** · 28th January 2011, 01:08 PM

This is what i have about CNEU_2011.40:

[Only registered and activated users can see links. ]

cb777uk · 29th January 2011, 06:28 PM

thankyou been looking to see if there was a update

**lolypop000** · 29th January 2011, 07:50 PM

@smokefree

Format SD card to FAT32 and Europe NT 2011.32 1.97GB UnLocked Image For older devices will run from SD

Look on your first picture FAT32 is 1.87Gb

FAT is 1.83Gb

FAT support only file to 2Gb
FAT32 support file to 4Gb

Just format SD to FAT32 and map from caty will go on SD

**smokefree** · 30th January 2011, 07:06 PM

Originally Posted by lolypop000

@smokefree

Format SD card to FAT32 and Europe NT 2011.32 1.97GB UnLocked Image For older devices will run from SD

Look on your first picture FAT32 is 1.87Gb

FAT is 1.83Gb

FAT support only file to 2Gb
FAT32 support file to 4Gb

Just format SD to FAT32 and map from caty will go on SD

Regret to note that the change of file system on the 2 GB microSD card makes no difference (actually it got even worse...). I used the PC to format the card in FAT32:

formatlp

Also tried SD Formatter 3.0. That application doesn't even let you choose the file system. By default it formats a 2GB card in FAT. So back to my earlier thought: what good is a map of 1.97 GB for older units if it doesn't fit on either the unit or a 2GB card?

**smokefree** · 30th January 2011, 08:09 AM

@ lolypop000

Will try your suggestion when I get home later today and report back. If that works, I would be really happy!!!

**topsmoke** · 30th January 2011, 10:56 AM

Hi,

I downloaded the files from post 1 locked files and unlocked them with jetmouse 1.5 patched and loaded them into mapsource 16.6.3 patched and everything seems fine.The maps transfer to my device fine.
However when the device is turned on I get a "Maps can not be authenticated message" I take it this is the GMA thing.

I tried using the fast unlocker 1.5 and still the same error.Is there a way to solve this ?

Plan B:

So downloaded the unlocked images in post 27 and they load into the device fine.Works great 1 at a time but is it possible to merge the files into 1 map ?
When I extact each rar file I have tried renaming them from gmapsupp.img to 11111111.img 11111112.img etc etc untill I have them all as img files.
I then used gmap tool and try to use this to compile 1 map adding all the .img but it creates errors.

Can this be done ?

Thanks

**catymag** · 30th January 2011, 01:35 PM

Originally Posted by topsmoke

Hi,

I downloaded the files from post 1 locked files and unlocked them with jetmouse 1.5 patched and loaded them into mapsource 16.6.3 patched and everything seems fine.The maps transfer to my device fine.
However when the device is turned on I get a "Maps can not be authenticated message" I take it this is the GMA thing.

I tried using the fast unlocker 1.5 and still the same error.Is there a way to solve this ?

In post one there are links for mapsource installation
to unlock you can run this on your gmap folder and send unlocked IMGs to your device
[Only registered and activated users can see links. ]

Fast IMG Unlocker unlock IMGs and you wont have the gma problem anymore, run it on your IMGs correctly ,it doesnt fail.

**Reggiee** · 20th September 2011, 09:09 PM

I tried this on my Oregon 550 and it all works well ! First I selected the maps in MapSource and transferred them to a USBstick. Secondly I copied the created map (Garmin) to my harddrive and used Fast IMG Unlocker. Finally I copied the Garmin map to my Oregon. At startup I got the message "Can't authenticate" but after clicking on OK, all the maps I selected/copied were (de)selectable and useable. This workaround works well with the new securitymethode with gma-certificates.