Thread: No pre-boot mode possible on DriveSmart 50 LMT-D 5 ?

I'm having to guess a lot here. Following with the assumption you did what i wrote before:

So in the 2826 folder you used the ramloader (Ldr.bin) from the DS51's fw is what i think you're saying

That video seems to be showing that even with DS51 Ldr.bin flashed it's behaving the same as when it had dezl 580 full firmware flashed in preboot? (i.e., via the 1.rgn you linked previously). It's also still identifying as "DriveSmart 50" on the splash screen as shown both in your photos in post #52 and in your video linked above, correct?

As the device still turns on it's not fatal (yet), BUT: You need to give me as much information as you can if we are going to find a way out of this mess. I need to know for example if the DS51 Ldr.bin you used did in fact actually initiate when the SD card was read and if it did initiate whether you'd left it's (the Ldr.bin's) HWID as 2586 or if you'd changed it in RGN_Tool to 2826 before using it. I need to know which HWID is now written to the device as well as which ramloader was last written.

There's also a chance that the screen will work PRIOR to the device loading the incompatible fw during the attempted boot process, so tell me if you've checked if preboot is available when the device re-starts (hold the top LH corner as it's being forced off and keep holding it as it re-starts by itself to see if it behaves differently.