Quote Originally Posted by Giomen View Post
gmaptool.exe - go to menu option - check for advanced and experimental options - go to menu write - check for TRE parameters and change (2)=4, (3)=23

This way could to give you possibility to view your map in marine mode or on 2010C. For automobile mode in 620 you must see your map unchanged in any case - if no so you have bad map
Thank you Giomen for your expert advice. Map now loaded successfully into GPSmap 620 . I then transferred the waypoints with Homeport. In Homeport there is an option to display; Symbol, Symbol and Comment, Symbol and Name. In the 620 I only have the option to display; Symbol, Comment or Name. Is there a way to modified the 620 to display Symbol and Comment?
Now to the 2010C chartplotter. I think I did not make my last post very clear. The 2010C does not read image files, only the older format Bluechart data card. I can transfer/merge the waypoints from a .gdb file using the Data Card Programmer but the map blue water colour does now show as it appears in Homeport/Mapsource. The shore outline would appear to be ok. Perhaps if this is still confusing, I could send the two different screen shots of the maps. Also, I would need to display Symbol and Comment similar to the 620. I'm sure you will succeed with this challenge.