Thread: white dotted line on screen

In case you're unfamiliar with the procedure how to replace the LCD screen: it's much easier than you think.
Here's a video clip showing you in real time how it's done on a nüvi 1300. The procedure on a 14xx is identical.
To open up the casing, you'll need a size 5 torx screw driver:



Only thing not shown very clearly in the video is how to detach the ribbon cable from the circuit board.
See picture below:



All you do is carefully lift the brown/grey strip (see red arrows) with two finger nails so that it rotates away from the ribbon cable.
The flap is a hinged part that stays with the connector on the circuit board: