Quote Originally Posted by dasilvarsa View Post
Have a look in Garmindevice.xml
If you get this <PartNumber>006-B0972-00</PartNumber> then your device uses the Non-MTK Firmware that Neil Suggested.
Yes, that turns out to be the correct version. Here's what I did next:

1. Cleared NVM.
2. Loaded FW v5.4 (version supplied by Neil).
3. Cleared NVM.
4. Verified FW version in System Info: it is now v5.4:

cvki

5. Loaded FW v6.2 (recent most version via WebUpdater).
6. Cleared NVM.
7. Used GPS in car and driven for about 5 minutes at speed > 50 km/h (proper satellite signal).
8. Switched unit off and back on again.

EULA still shows every start-up.