You probably won't have to enable anything. When you get it, check the splash version in the Inventory [press the battery symbol in the top RH corner for several seconds to enter a hidden menu. Then press Next>Start Test>More and look at the info following 'Splash'. If it shows D1340-50 you have everything anyway and don't need to flash the modded splash from that thread. I only mentioned that in the previous post because some regional 1410's had limited features, eg. early Russian models had Splash of D1340-90 which enabled SLI but not LA or JCV. The logo bin used in Loly's thread is lifted from the senior model and so enables them all. When you get it, post in that thread if you need any help with it, but i'm sure you'll be fine if you do have to do the flash. It can be done from microSD without using updater.exe & pre-boot if you want. Sorry your 200w is dead but the 1410 will put it to shame anyway.
Bookmarks