Thread: Question for Mrs. Catymag on the Oregon 450

I'm Mrs

Oregon


Screen calibration - POWER button for 10-20sec.
Removing user data: hold left, top corner of the screen when switching
Diagnosis: satellites on the screen and hold for 5 seconds or more of the upper left corner of the screen
Screenshot: press the switch.
You have to try it, because pressing the switch has other functions:
Runs screen locking / unlocking the screen
- Enables / disables the receiver.
Screenshot:
Main Menu -> Settings (Setup) -> Display (Display) -> Screenshots (Screen Capture) and select the 'in' ( 'in' is enabled).(Power). When you activate the dump briefly press the power button (Power). When you turn off Oregon feature automatically willturn off and you'll need to re-activate it.
Waypoint Insertion:
1. Clicking on the map. At the top of the box will be shown the position (coordinates).Clicking on this field it will open a window where you can:
'Drive' - navigate to a waypoint;
- Save a waypoint;
- Return to the map.
2. Wedge on the icon 'Select waypoint' in the main menu
Compass (on / off.) Main Menu -> Configuration -> Direction -> Compass
Calibration of the compass: main menu -> hold the compass for about 5 seconds until the calibration window will appear

from
[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]