Garmin Auto Drive Hellas v5.20

**leitz5138** · 30th July 2018, 10:56 AM

Hi,

Digital Tracer Electronics released today Garmin Auto Drive Hellas v5.20 in two versions, for multilingual and non-multilingual devices.

NOTE from the site:

CAUTION:

Multilingual version may be incompatible with older devices. If your device is a Streetpilot, Nuvi 200, 250 ,205, 255, 255W, 215, 265, 300, 350, 360, 510, 700, 710, 760, 765, 1200, 1300, 1310, 1350, 1410, 1490t, Zumo 550 or 660, you may have to use the non-multilingual installer, further below.

Version 5.20 is not suitable for KENWOOD DNX-5260BT and DNX-520VBT. For more information, please contact Kenwood at 2310888890.

Download links

MULTILINGUAL with Greek Characters
[Only registered and activated users can see links. ]

MULTILINGUAL with Latin Characters
[Only registered and activated users can see links. ]

NON- MULTILINGUAL with Greek Characters
[Only registered and activated users can see links. ]

NON- MULTILINGUAL with Latin Characters
[Only registered and activated users can see links. ]

**Genius3** · 1st August 2018, 09:43 AM

Auto Drive Hellas v5.20

Auto Drive Hellas - Updates & Downloads

Official page

Code:

Please Login or Register to see the links

How to use

Code:

Please Login or Register to see the links

gmapprom.img and F2933892C.jcv

Spoiler: Details only

**georgev** · 9th January 2019, 12:24 AM

PROBLEM with AutodriveHellas v5.20 NON-MULTILINGUAL with Greek ?!? HAS ANYBODY ELSE NOTICED THIS?

I recently updated 2 GPS 1490(US) and 1450(EU) w/version v5.20 NON-MULTILINGUAL with Greek Characters from v4.50T Greek.

Note for non Athenians: Athens has the "ring of the center" (=circular area around the center of Athens) where only cars w/odd license plates may enter on odd dates and ...even... on even dates (for air pollution reasons, government says).
AutodriveHellas proposes to the users to put "avoid unpaved roads" in order to avoid the ring of the center: When a user does this, the ring of the center appears with no roads and navigation is done around the ring of center (avoiding to drive in the center (in the cases his car is odd/even on even/odd days)

Today I drove downtown (in the ring of the center) and all of a sudden the roads disappeared. For a moment I thought I had set "avoid unpaved roads" and I was correct so I disabled all the avoidances... The roads appeared for a while but soon they disappeared again. I changed the setting of avoidance of unpaved roads a couple of times ... the same. I changed the GPS unit (from 1450 to 1490) the same...

I will try to investigate it and also reload the v5.20 maps and also try the previous versions and inform you but in the meantime:
Has anybody noticed this problem with ANY version of v5.20 or the opposite, i.e. it works fine IN THE RING OF ATHENS? Please report !

Above test with GPS nuvi 1450(EU) & 1490(US) powered by the same TMC receiver GTM-25.

==============
"PROBLEM" SOLVED:
===========================================================================
After a small investigation I found out that as all the roads of the "ring of the center" of Athens are characterized as "unpaved" (though they are not), they are "of least importance from a size point of view" so when you zoom out they are the first to disappear (leaving only the bigger roads in view). So if you start to zoom all of a sudden all the roads of the center disappear again. If you are ALREADY in the center without a navigation route, the zoom factor of the map is such that shows your car in a place without roads...!!! But if you zoom in everything appears back and navigation is normal (at any zoom factor)
===========================================================================
SORRY FOR THE FALSE ALARM...!!!

**armitatz** · 3rd September 2018, 08:08 PM

this method does not work

**kap55** · 3rd September 2018, 08:16 PM

if you read more carefully post #3 everything is working nice.i have tested it.........

Do not quote previous post.
Read [Only registered and activated users can see links. ]

**armitatz** · 5th September 2018, 02:59 PM

I had tried this method with previous versions and it was working. This particular version does not work. Perhaps it has to do with my windows (10 64bit) but the universal extractor does not work. I also tried the new universal extractor. It gets stuck.

**Genius3** · 7th September 2018, 08:43 PM

I'm using Mic. Windows 10 v1803 x64 (64-Bit).
Today I tried it again. In my case, it works fine.
See attached picture.

screenshot

**armitatz** · 8th September 2018, 07:07 AM

it does not work for me for both files in the page...

Spoiler: Images

Use spoiler for large images.

**Midnight Blues** · 10th September 2018, 10:19 PM

Originally Posted by armitatz

it does not work for me for both files in the page...

Then use Universal Extractor 2

Code:

Please Login or Register to see the links

**Genius3** · 8th September 2018, 08:28 PM

@armitatz, to make it easier to work.

Here you have:

[Only registered and activated users can see links. ] (62,1 MB)
Inside
- F2933892C.jcv
- gmapprom.img
(.img untouched (locked))

and

[Only registered and activated users can see links. ] (45,3 MB)
Inside
- gmapprom.img
(.img untouched (locked))