Thread: Nuvi 2595 loses maps and not recognized

Originally Posted by Neil

@cliffy2
Some units won't boot empty and require there be files onboard but in my experience 2595 is definitely not one of them, it can be totally empty .....

Originally Posted by cliffy2

Okay I've formatted it again with RMPrepUSB according to the instructions. The nuvi 2595(with an empty disk)boots as far as the Garmin screen with blue triangle, then shuts down. It is completely accessible as a storage device so I can delete and copy to it. Thoughts? I have neither garmindevice.xml or gmapbmap.img.

To be clear about that i knew it would because i deleted everything on my 2595 as a test before that post and it booted empty. With cure fw on board, your unit CANNOT boot, which is the whole purpose of the modded cure fw. It stops the boot so the unit can be accessed in Mass Storage Mode by PC.... But... it was just sticking on the Garmin logo and not 'shut down' as you said. If the screen went blank when it's being accessed in MSM that doesn't mean it's shut down [it cannot access MSM if turned off and should immediately turn on when connected to PC because that's then supplying power to it anyway]. And it should be empty when you look at it because it was re-formatted previously and it hasn't yet been able to boot to create those folders i mentioned. It's no problem for the unit if you do create a Garmin folder [and/or a .System folder too and add a basemap for that matter] while it's still got cure fw onboard provided you aren't using any possibly suspect files from your backup. Then for it to be able to boot fully you must flash the full original firmware back to it as you've now done.

..... Do you have a backup of region 41?

Originally Posted by cliffy2

@Neil

>>Do you have a backup of region 41?

Yes I think so. XMLfile03_regionfileonly__410.rgn? It was reloaded by Express into the folder 'SW-006-D1122-03-4.10'.

No that's not what i was asking, but if you didn't understand it means you don't have such a backup. [Only registered and activated users can see links. ] Fortunately you didn't need it now, but it's something for for you to do as a safeguard for the future.

Originally Posted by cliffy2

......
Okay I've got it! Once I had run CureFW(probably wasn't necessary) and then OriginalFW the device booted. There was no data on hard drive, not even a folder. I ran Webupdater the nuvi was connected immediately. I'm now on my way to a working GPS. Have reloaded POI's and Favs. I've now got to endure Express. Want to use MapUpdater but it wants a product key which I can't find or Garmin won't give.

If MU demands a product key for a map you know your unit's entitled to, you should be able to find that by going to your Garmin Account and if the device is registered look in 'My Maps' > Manage Maps. The map should be shown next to your 2595 and underneath is a clickable link 'Details'. That will take to to another page, scroll down to 'Installed Maps' and find the 'Code' which is the 'product key' MU is wanting. Then you should be ok to update with it.

Congratulations by the way.

Thread marked Solved.