OK, so you had an original US 1490 > flashed with Indonesian firmware to 1460 ID > bricked > cured with Cure3 [US firmware] > so it is now back to HWID 0972 1490 US as it was originally.

The thing is that when you cure a device, the usual rule is that you make the cure firmware using the firmware that's currently on the device. We can convert your unit to ID again, that's not a problem and the Damayanthi voice will work. The problem may be that the device bricked because of the original conversion US > ID. So to me it would make more sense to use RGNVoiceEditor to make your US fw compatible with the ID voice. You can get the latest Version 2.02 from this post#22: [Only registered and activated users can see links. ].

If you decide to do that [which is my recommendation] and you need assistance then post in the above thread for RGNVoiceEditor. Otherwise, if you really want to re-convert your 1490 to ID 1460 again you can do that by either flashing the complete ID fw or using the US boot.bin combined with ID fw1_resources.bin and fw_all.bin. The latter is a little safer. [Only registered and activated users can see links. ] as a guide only on how to do both methods, or post again here and i'll help you.