Thread: CityXplorer North America 2014.10 (all in one file FID 800)

Just FID 800 in kg, copy in sd/Map folder, anyname.img and anyname.unl

Originally Posted by coastline2001

yes i did, to be more detail, i did in the way below: but still can not see in the installed map list.

Find out your 10 digit gps unit id number before running Jetmouse! It has nothing to do with the serial number printed on the unit. Plug your GPS into a USB port on your computer. Once the green line finishes and the computer symbol is on the GPS screen, run the Garmin WebUpdater program. The UNIT ID will show up. Store this number into a text file so you don't have to look it up every time you want to unlock something. Call in 1390 Unit ID.txt or whatever.

Run Garmin Keygen (aka Jetmouse). Put in your 10 number Unit Id number. Select custommapset from the BOTTOM Map Product and not the top software Product. Put in 800 into the FID box and leave the rest alone. Click OK then on the Generate button on the BOTTOM. Copy the generated code and store it into a txt file named Full CXNA 2012.30.txt . Change the extension from .txt to .unl

On a SD card, create a FOLDER called Map . In that folder put
Full CXNA 2014.10.img
Full CXNA 2014.10.unl

All is perfect, you can check once again if unit id is ok in Garmindevice.xml in Garmin Folder in your unit.
or use infouc to see if the code is right for a map with FID 800
[Only registered and activated users can see links. ]
The whole procedure is correct
Edit: if you have loaded the small CX and you have the same version of CNA in your nuvi it wont appear in map list but it will work

thanks Caty,

i checked , the unlock ID is correct. but the map i have in unit is CN North America NT 2014.20 not 2014.10. is that the reason? i need 10 version map to go with this ?

i used GMAP tool to read the map info that downloaded here , seeems like FID is not 800.

Code:

Please Login or Register to see the links

@coastline2001
You have the full CX 2014.10 and only the MMR components need have the FID 800. All else including the NT parts still have the original FID 2920 but they are unlocked. If they were locked, there would be a capital "L" following priority of "30" for the locked parts. e.g. Houston would appears as:

I1136F74 NT 18818609 1 1252 30 L 1 2920 HOUSTON, TEXAS

You may have it loaded with any version of CNNT other than 2014.10 provided you don't have them both selected at the same time. Check only the one you're using at the time. That info is in post 21 immediately above your initial post here.

This particular 'quirk' sometimes occurs to the rare detriment of users as you've found. Certain aspects of a deselected map can still be accessed by the unit but it's not usually a problem. Seeing it has occurred with your unit, your self-diagnosed solution is the ideal workaround. The 'quirk' can be used to advantage in China using a US/EU unit with both Chinese and English versions of the map loaded but only the Chinese one enabled. The unit will still allow for search in Pinyin on the overseas unit's Latin keyboard which may have no Chinese kb. Navigation is then done using the visible Chinese map. That also may be of particular interest to you.