Thread: iGO Primo i3 For WINCE

All Primo versions works well on all Pna with 64 mb RAM, also with TTS voices......pluritested .

..........put in SYS.TXT :

[debug]
reserve_memory=2097152
max_memory=440000000

Ciao !

You're right, I forgot that the PNA with low memory crash,, Thank you for your recommendation.

Sometimes dependent of whole configuration, like type of CPU, RAM, Chipset, etc. , for ex. Samsung CPU + 64MB RAM - no problems, your Navman S50 has very good and strong cpu samsung 2443 with 400 MHz, probably your another pna is with good configuration, at all even lower cpu + 64MB will work good, maybe not well TTS + 3d buidling + dem, but with optimization of RAM through sys.txt, it can work ok, maybe little bit more problems can be at loading bigger speedcam.txt files at 1st runing, like speedcam.txt of 3-4 MB size.

Originally Posted by Black Wolf

Sometimes dependent of whole configuration, like type of CPU, RAM, Chipset, etc. , for ex. Samsung CPU + 64MB RAM - no problems, your Navman S50 has very good and strong cpu samsung 2443 with 400 MHz, probably your another pna is with good configuration, at all even lower cpu + 64MB will work good, maybe not well TTS + 3d buidling + dem, but with optimization of RAM through sys.txt, it can work ok, maybe little bit more problems can be at loading bigger speedcam.txt files at 1st runing, like speedcam.txt of 3-4 MB size.

Holla my friend

My Chinese Nav has 64 m.b. and cpu with 333 Mhz (made in China)....and use Primo 2.4 with Italy map, dem, building, poi, skin Dimka and speedcam.
Some slowdown with Europe maps......

I had purchased Chinese Nav (70 euro) just to test Primo on these devices......

I agree with you, i saw some of that chinese 64mb ram pna devices, and worked ok, maybe little bit slower like you told, some of them work well even with 64mb ram .