Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Likes:
Results 1 to 10 of 11
-
28th August 2012, 06:42 AM #1Member
- Join Date
- Aug 2012
- Location
- Germany
- Posts
- 22
- Rep Power
- 29
3590LMT - Screenshots 3D Traffic with GTM36
Hi,
i made some screenshoots about the 3D Traffic Function with a GTM36 Receiver:
First off all, here are a screenshot about the firmware etc.:
[Only registered and activated users can see links. ]
To receive traffic informations it is necessary to connect the cable to the gps and
to the power supply.
Then you have to activate the traffic-information-service ont he ttraffic menue on the GPS
[Only registered and activated users can see links. ]
After 3-5 minutes, the first traffic informations are coming in....;-)....:
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
-
28th August 2012, 06:43 AM #2Member
- Join Date
- Aug 2012
- Location
- Germany
- Posts
- 22
- Rep Power
- 29
-
28th August 2012, 06:44 AM #3Member
- Join Date
- Aug 2012
- Location
- Germany
- Posts
- 22
- Rep Power
- 29
-
28th August 2012, 09:26 AM #4Navigation software expert
- Join Date
- May 2010
- Location
- EU
- Posts
- 2,360
- Rep Power
- 844
Can you please add also picture from developer info?
When you go on view map on right side of screen press on speed and you will see speedometer
press in center of speedometer for 10 sec and you will see new window(here where you can change MTP to mass storage)
you will find here developer info and when you press you press 1x down arow and you will see GTM info and Traffic status.
Please if you can take screen shot of this window.
p.s.
Can you upload your RemoteSW folder,please?Last edited by lolypop000; 28th August 2012 at 10:05 AM.
-
28th August 2012, 02:21 PM #5Member
- Join Date
- Aug 2012
- Location
- Germany
- Posts
- 22
- Rep Power
- 29
...and here now the developer infos as requested i hope........;-).......:
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
-
28th August 2012, 02:22 PM #6Member
- Join Date
- Aug 2012
- Location
- Germany
- Posts
- 22
- Rep Power
- 29
-
28th August 2012, 02:52 PM #7Navigation software expert
- Join Date
- May 2010
- Location
- EU
- Posts
- 2,360
- Rep Power
- 844
I dont need more screenshot thank you for this.
I only need remote SW from your nuvi from .System folder if you can please upload it and your TrafficProvider.xml.
Then will try if my GTM36 will work becouse then i will have all data like you.
-
28th August 2012, 03:19 PM #8Member
- Join Date
- Aug 2012
- Location
- Germany
- Posts
- 22
- Rep Power
- 29
no problem:
remoteSW as zip-file
-
28th August 2012, 03:24 PM #9Member
- Join Date
- Aug 2012
- Location
- Germany
- Posts
- 22
- Rep Power
- 29
and the TrafficProvider.xml............also as a zip-file...............
Jope it works..............let me known..........;-)
-
28th August 2012, 04:10 PM #10Navigation software expert
- Join Date
- May 2010
- Location
- EU
- Posts
- 2,360
- Rep Power
- 844
I try but no luck,still no Traffic data from GTM36
Bookmarks