Change the built-in preloaded basemap in Garmin GPSmap 60/76C(S)x (Basemap Atlantic v2)

**catymag** · 11th October 2010, 01:26 AM

Change the built-in preloaded basemap in Garmin GPSmap 60/76C(S)x (Basemap Atlantic v2)

Also change Atlantic to Americas, or either of them to Pacific and vice versa - See Post #9 for Pacific v2 basemap

This program is made to change the built-in preloaded basemap in Garmin GPSmap 60/76C(S)x devices.
It works on other Garmin devices as well (etrex/Legend HCx and compatible StreetPilots [c320, 2610 & 2720 tested]. Should work with similar units which load the basemap to rgn3).

How to apply this Program:
1. Connect your GPS to your computer
2. Start the Atlantikbasemap.bat by doubleclicking it
3. Wait a few seconds untill the flash is complete.

If you want to flash the US basemap then start USbasemap.bat

In Garmin GPSmap 60/76C(S)x US version you have 4 languages (english, spanish, portuguese and french) in European version there are much more languages,with this you can unlock in US version all European languages.

The Atlantic Highway basemap includes Europe, extreme western Russia, Africa, and the Middle East, and covers an area from N75 to S60 Latitude, W30 to E60 Longitude. Also included is a high-level worldwide map with political boundaries and major cities.
Please note: Garmin mapping units come with built-in, permanent basemaps
Factory-installed basemaps cannot be altered.....(usually)

more infos

Code:

Please Login or Register to see the links

download

Spoiler:

[Only registered and activated users can see links. ]

credits to juergenss

**mmsriver** · 11th October 2010, 02:45 PM

Hi, how about pacifics version basemap for the same models ? :-)
TIA !!!

**kincop** · 3rd May 2011, 01:35 PM

Originally Posted by catymag

Change the built-in preloaded basemap in Garmin GPSmap 60/76C(S)x (Basemap Atlantic v2)

This program is made to change the built-in preloaded basemap in Garmin GPSmap 60/76C(S)x devices.
It works on other Garmin devices as well (etrex etc).

How to apply this Program:
1. Connect your GPS to your computer
2. Start the Atlantikbasemap.bat by doubleclicking it
3. Wait a few seconds untill the flash is complete.

If you want to flash the US basemap then start USbasemap.bat

In Garmin GPSmap 60/76C(S)x US version you have 4 languages (english, spanish, portuguese and french) in European version there are much more languages,with this you can unlock in US version all European languages.

The Atlantic Highway basemap includes Europe, extreme western Russia, Africa, and the Middle East, and covers an area from N75 to S60 Latitude, W30 to E60 Longitude. Also included is a high-level worldwide map with political boundaries and major cities.
Please note: Garmin mapping units come with built-in, permanent basemaps
Factory-installed basemaps cannot be altered.....(usually)

more infos

Code:

Please Login or Register to see the links

download

[Only registered and activated users can see links. ]

credits to juergenss

Hi!
Tried to install this but there is a Error* saying : The GARMIN device is not responding. Please ensure the following and try again. 1)The GARMIN device´s Interface option is set to GARMIN or Host mode. 2)The cable is connected to the correct seriel port. 3)The GARMIN device is turned on.
Ive just connect the device (60Csx) to a usb port on my pc (Vista) and when the Updater starts I choose USB device (where I can see the name of my device) and after that- hit Ok > ErroR!*
THen I try to change Connection Settings in Updater and choose Seriel Port: Com3 BaudRate:115200 (also tried BaudRate 57600,38400,19200, 9600) >ErroR! (same message as before)

**catymag** · 4th May 2011, 01:22 AM

reinstall Garmin drivers

Code:

Please Login or Register to see the links

and if you can ,try to run it on a pc with XP

**basrite** · 1st June 2011, 05:11 AM

*bump*

anyone got the Pacific RGN file for this?

brett43au · 16th August 2012, 02:10 AM

Hi will this also work on the internal map of a rino 120 ?

**catymag** · 16th August 2012, 01:09 PM

Originally Posted by brett43au

Hi will this also work on the internal map of a rino 120 ?

no it's for gpsmap60/75 as title says

**rayb** · 28th October 2012, 10:23 PM

Originally Posted by catymag

reinstall Garmin drivers

Code:

Please Login or Register to see the links

and if you can ,try to run it on a pc with XP

Followed the above instructions, fast easy process of base map change on my 76 CX. Strange bit of trickery to get the file to down load off that site but it did eventually work.

**Neil** · 5th November 2014, 12:44 PM

Originally Posted by mmsriver

Hi, how about pacifics version basemap for the same models ? :-)
TIA !!!

Originally Posted by basrite

*bump*

anyone got the Pacific RGN file for this?

Yep, finally. Here is a pack for updating the basemap to Pacific V2 on units using region 3 for basemap storage:

Spoiler: Click to Download

Confirmed working on SP2720, other similar units including GPSMAP 60/76C(S)x localised for NA or EU which use rgn3 for basemap should also be able to flash this basemap for use in Pacific area.

Extract the rar file to somewhere convenient on your PC. Drag Pacificbasemap.rgn onto Updater.exe and connect your unit to PC, select the appropriate connection and press OK to flash when unit is detected. Don't interrupt the flash or your unit may brick. Your current Americas or Atlantic basemap will be overwritten. Confirm your unit is compatible BEFORE flashing.

EDIT: Now confirmed working for StreetPilots 2610 and c320 also.