iGO Speedcam (DISCUSSION)
speedcam iGO
speedcam iGO skin Primo/ NextGen/ Luna
FAQ briefly in fact
Spoiler: +
For iGO Primo (NextGen) Luna *.txt put files in a folder content/speedcam
Before the update we do not delete it file speedcam.spdb.
File speedcam.spdb updated every time iGO is started.
Large files speedcam.txt they can be loaded at the first start iGO very long on weak devices, Win CE.
Radars do not beep and are not notified in the simulation, but are only visible on the map.
X,Y - coordinates (longitude, latitude).
TYPE - camera type
SPEED
In iGO there are three options for displaying the speed when warning:
- speed in the file;
- the permissible speed on the section of road on which you are moving;
- no speed at all.
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
48.057311,46.347428,1,60,1,121 - speed in the file
48.057311,46.347428,1,0,1,121 - speed from the map
48.057311,46.347428,1,,1,121 - without speed
DIRTYPE - how many directions does the camera work in: In all=0; In one=1; Both ways =2:
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
48.057311,46.347428,1,60,1,121 - In one
48.057311,46.347428,1,60,2,121 - Both ways
48.057311,46.347428,1,60,0,121 - In all
DIRECTION - the direction of movement of the car: North=0; East=90; South=180; West=270. By DIRTYPE=0 this parameter has no value.
Format speedcam.txt
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION or IDX,X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
iGO does not read IDX, for this reason, which speedcam.txt format does not affect the operation of iGO
What additional entries can speedcam.txt
Signature, point comments
All signatures and comments, only after the comma
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION, <signatures>
20.555555,30.777777,1,90,1,180, <comments>
[Only registered and activated users can see links. ]
AND FAQ speedcam in iGo
Spoiler: +
I have long wanted to explain the use of speedcam in iGo.
spc-speedcam, that is, speedcam in encrypted format.
spc-not signed in spdb.
spc-consists of the main types of cameras with directional signaling.
spc-ASC has a section start and close.
spc-after coordinate matching has an advantage over speedcam.txt.
Speedcam.txt - local dangerous points.
Speedcam.txt-saved in spdb.
Using * spc from two manufacturers at the same time (TomTom, HERE) increases the alarm points by * twice
Pay attention to the date of creation of the spc, it is possible that the value of many points no longer matters.
use any speedcam.spc, from HERE or TomTom. IGO it doesn't matter who does the spc.
Using * spc in combination with * txt.
Perhaps it all depends on the user's desire, which leads to a doubling of the alarm points.
* ASC-Average Speed Camera.
* twice-a relative indicator (the coordinates of two different bases are unlikely to coincide).
* ASC-use one set of start-finish when working with the pongo, wandel skin, so as not to disrupt the notification system with false positives from duplicates.
Two medium speed cameras, no more than that:
the first (beginning of the zone) with a measurable limit, for example 80km / h.
the second (end of the zone) with a speed limit of 5km / h.
SpedcamUpdates.spud
saves all added from the navigator screen speedcam.
SpedcamUpdates.spud the file is stored. iGO_Luna-->privdocs--->InappShop--->Mount--->speedcam--->SpedcamUpdates.spud
NextGen iGO_XXX-->privdocs--->InappShop--->Mount--->speedcam--->SpedcamUpdates.spud
[Only registered and activated users can see links. ]
Dear friends, Discussion brings a solution to the issue. BUT ! If you showed a movie, screenshots, but did not explain what you did for such a result, then your help is zero. If your advice was not confirmed on other devices, then your help is zero. I understand that with modern technical equipment, it is possible to make any installation, which may lead to confusion. Let's just say that any ostentatious post without explaining the actions is a flood in this topic.
I hope this will help to understand any questions without clogging up the topic with empty posts.
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
Last edited by Andrey Form; 9th October 2024 at 09:23 AM.
[Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ]
Last edited by Andrey Form; 31st May 2022 at 07:50 PM.
[Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ]
Andrey Form i read allot of your speed cam stuff and have a few question if you can answer.
Here in usa there is not many resorces for alert points like im seeing for europe. we can get a basic speed cam file but it doesnt have many mobile speed cams with mostly red light camera. i am running Luna Mod Garigor which from reading is a mod from the pongo skin. here are my question as i have yet to get mobile speedcams to work. i do see some redlight cameras if i use scdb txt but i dont think any show with my custom speed.txt.
1. Here is an example of some of my speed text entries
Do these look ok to work with my luna version i have?
2. Is there a limit on the number of speedcams you can have in a txt file? i beleive i have alittle under 20k
3. Did the speedcams type change in the luna version? example 1 is supose to be moble speedcams and 4 is suppose to be redlight.
trying to narrow down whats wrong with speedcams on my luna version. i have the speedcam ux that cam with the mod. i dont understand why the scdp works but my custum one doest. even if i just have 10 entries of known points they dont show up. the scdb is pretty much useless around me as it has none in my 50 mile radious and mostly just red light cams.
Last edited by Andrey Form; 31st May 2022 at 06:50 PM.
@badwhip
There are no differences in the speedcam codes for Luna, NextGen, Primo. Codes are assigned by type in speedcam.zip. Speedcam file size limits.txt no.
Use 32 -63 encoding, there will be no confusion as it happens in 1-32
Last edited by Andrey Form; 2nd April 2024 at 10:18 AM.
[Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ]
And it seems there are differences in the code number
[22] = "SpeedBump", skin [18] = "Speed Breaker"
[23] = "NoParkingZone", skin [24] = "Stop Prohibited Camera"
Databases and codes of Bulgaria and Greece, these two databases (data collection sites) do not collect the following codes
Spoiler: BG
not in the database - Х
[Only registered and activated users can see links. ]
Spoiler: GR
not in the database - Х
[Only registered and activated users can see links. ]
As a result of comparing databases, they do not collect information about the following codes
[24] = Dangerous Railroad Crossing
[25] = Highway Exit
[26] = Speed Boards
[27] = Dynamic Traffic Light
[28] = Max Height
These codes are not collected by databases and are not systematically updated, they are individual accumulations
Last edited by Andrey Form; 20th December 2021 at 07:19 AM.
[Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ]
Spyder this is what interesting. I don’t believe I see the red light or speed cameras from your files. I loaded in content/poi amd content/usericon would I see these in the search menu too? . ... Is there anyway to have a custom poi with a red light camera anywhere near cincinnati Ohio 45252 area because if I see one show up there I know it works. ....
You have to simply overwrite posted content folder to existing content folder in your device. Then in map settings/poi settings the new icons are visible to eneble/disable.
Unfurtunately in Cincinnati there is no speedcam in database, only two near New Richmond
Spoiler: Map
[Only registered and activated users can see links. ]
Last edited by Boki; 30th June 2021 at 04:48 PM.
Reason: quote shortened
this is mainly only of importance for the display style of certain road signs
spr_speedlimit_eu.bmp [Only registered and activated users can see links. ] spr_speedlimit_usa.bmp [Only registered and activated users can see links. ]
Last edited by lunapark; 1st July 2021 at 05:58 PM.
Bookmarks