iGO NG v.9.19.2.762838 - 16.September 2019

**jynie** · 31st December 2019, 01:14 PM

I am just curious why no one iGO-NextGen for CE is fully cracked? If it means that cracking "iGO-NextGen.exe" is more difficult than "iGO-NextGen.apk"?

**Boki** · 31st December 2019, 01:46 PM

Absolutely. There was already a discussion about it ...
The point is that the NG exe file itself, in relation to Primo, is designed to be extremely dependent on licenses. Moreover, the licenses themselves are no longer as "rich" as they used to be.

**zsiga68** · 31st December 2019, 09:06 PM

That's true. For example, ftr files do not work. It's hard to get the right files. Building, terrain etc..

**TuniBase** · 3rd January 2020, 01:23 AM

Hello. I tried this version and it works fine with my device (Serioux UPQ500 - 800Mhz, 256MB, 8GB, 800 x 480).
But there is something wrong with scaling and looking at the map. There are no buttons to zoom in [+] and out [-] and a 'back' button to return to the main menu. There may be no problem with multitouch devices, but with ordinary devices this is a disadvantage. My question is, does anyone else have this problem and is there any solution to this?

**modemakias** · 3rd January 2020, 02:52 PM

Hello... @TuniBase

yes you are right ... it might be for a special device...
it has a strange map zoom and if you choose you can't go back you have to reset the device.
i'm working for a mod but i don't know the time i need.
try this one: [Only registered and activated users can see links. ]
it's a little faster with classic skins, and if you have a problem with sound, tonight i will post a solution...

**arslankayna** · 3rd January 2020, 03:46 PM

If delete ux/focus.zip, you miss all problems.
Focus zoom works only in drag mode....not in map mode!

This version is fast I have ever use!

**TuniBase** · 3rd January 2020, 11:49 PM

Originally Posted by modemakias

...yes you are right ... it might be for a special device...

Thank You so much !!! I'll try the program in a little while.

Originally Posted by arslankayna

If delete ux/focus.zip, you miss all problems.
Focus zoom works only in drag mode....not in map mode!!

Thanks, this is the solution !!! Everything is working fine now.

**arslankayna** · 4th January 2020, 06:36 AM

Originally Posted by costas3850

Or start it again.
Somehow it stays in the backgroud and if you launch it a second time it will show to the foreground.

add in sys.txt;

[loading]
show_statustext=1
background_startup=0
stay_in_background=0

Push exe batton, program start after 4 sec,,,,,,loading picture and status text show....

**arslankayna** · 4th January 2020, 09:02 AM

Originally Posted by Boki_Srb

The point is that the NG exe file itself, in relation to Primo, is designed to be extremely dependent on licenses. Moreover, the licenses themselves are no longer as "rich" as they used to be.

This is true: licenses themselves are no longer as "rich" as they used to be.
This mean more old licences might needed to add to have full feautures....

Originally Posted by zsiga68

That's true. For example, ftr files do not work. It's hard to get the right files. Building, terrain etc..

That's fault. ALL WORKING....

Spoiler: licence to start program and to see terrain

Spoiler: photo

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Spoiler: building load under map licence ex.Hungary_HERE_2018.Q4_181121-licence needed= Mega_Free_1_Year_Update_FEU_NQ_2018_Q4

Spoiler: truck restrictions needed ftr map ex.Hungary_HERE_2018.Q4_181205_(TI)-licence needed= Europe_map_NQ_Truck_2018_Q4

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Spoiler: Unlock truck restrictions

**weresgyufa** · 5th January 2020, 11:34 AM

Thanks for the upload, i installed it to my Pioneer AVIC F900BT under the AVICnet2.1 Firmware and it's working fine, i deleted the Focus.zip from the UX folder and place in the status text to the sys-file.

The app starts but i have some issues with the licenses, i use the HERE 2019 Q2 with the Europe_map_NQ_Truck_2019_Q2.lyc and this is working under Primo, and the original Pioneer Igo8, only the nextgen has a map inicializing issue.
Edit: -> IT'S SOLVED > i was a noob i placed in the Mega_Free_1_Year_Update_FEU_TA_2019_Q2.lyc and its working now, maps loaded fine. Sorry

Spoiler: large images

The second thin is, this head unit has integrated TMC receiver, will it work whit tis unit or what should i need to get this feature alive?
Thanks for the comments or PM's.

BR.
Gyuri

Please learn [Only registered and activated users can see links. ].