Thread: How to make a RESET or HARD-RESET

How to make a RESET or HARD-RESET

How do I reset my device if it freezes or does not start?
How to reset your device.


GO 6000/6100
GO 5000/5100
GO 600/610
GO 500/510
GO 400
GO 60
GO 50
GO 40
START 60
START 50
START 40
GO LIVE 800 series
GO 1000 series
GO 2505 (USA)
GO 2405 (USA)
GO 950/750/550
GO 940/740/540
Via series
XXL 540 S/ 530 S
XXL IQ Routes / XXL Classic
XL LIVE IQ Routes / 340 Live
XL IQ Routes / 340
XL (30 - Series ) / 330
Start 20 / 60 Series
ONE IQ Routes / 140
ONE ( 30-Series ) / 125 / 130
RIDER 400, RIDER 40
RIDER, Rider Pro, Urban Rider
Blue&Me TomTom 2 series
Blue&Me TomTom (LIVE)


Step-by-step instructions

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again.


2.Reset your device.
Press and hold the On/Off button until you hear the drum sounds and the device restarts. This can take 30 seconds or more.

[Only registered and activated users can see links. ]



GO 930/730/630/530
GO 920/720/520


To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Remove the SD card
If your device uses an SD card, remove it.


3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


4.Turn your device on.
Press the On/off button for at least 5 seconds.


5.Insert the SD card
If your device uses an SD card, insert the SD card.



Where to find the reset button

The reset button is on the bottom of your TomTom device







GO 910/710/510


To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Remove the SD card
If your device uses an SD card, remove it.


3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


4.Turn your device on.
Press the On/off button for at least 5 seconds.


5.Insert the SD card
If your device uses an SD card, insert the SD card.



Where to find the reset button

The reset button is on the bottom of your TomTom device





GO, GO 300/500/700


To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Remove the SD card
If your device uses an SD card, remove it.


3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


4.Turn your device on.
Press the On/off button for at least 5 seconds.


5.Insert the SD card
If your device uses an SD card, insert the SD card.



Where to find the reset button

The reset button is on the bottom of your TomTom device




XL IQ Routes² / XL Clasic



To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


3.Turn your device on.
Press the On/off button for at least 5 seconds.

Where to find the reset button

The reset button is on the bottom of your TomTom device.




ONE XL


To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Remove the SD card
If your device uses an SD card, remove it.


3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


4.Turn your device on.
Press the On/off button for at least 5 seconds.


5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device.




Start2 / Start Classic /EASE
Start

[Only registered and activated users can see links. ]


Step-by-step instructions

To reset your TomTom device, do the following:
1.Remove the Mount from the device by pressing the release button on the Mount.


2.Pull the back cover off the device by holding either side of the cover and pushing the device through the centre of the cover.
3.Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. The reset button is on the bottom of your device.


ONE 3 rd Edition

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


3.Turn your device on.
Press the On/off button for at least 5 seconds.

Where to find the reset button

The reset button is on the bottom of your TomTom device.





ONE 2nd Edition
ONE 1st Edition


To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Remove the SD card
If your device uses an SD card, remove it.


3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


4.Turn your device on.
Press the On/off button for at least 5 seconds.


5.Insert the SD card
If your device uses an SD card, insert the SD card.


Where to find the reset button

The reset button is on the bottom of your TomTom device.




RIDER 1st Edition, RIDER 2nd Edition

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again.


2.Remove the SD card
If your device uses an SD card, remove it.


3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


4.Turn your device on.
Press the On/off button for at least 5 seconds.


5.Insert the SD card
If your device uses an SD card, insert the SD card.
Where to find the reset button

The reset button is on the bottom of your TomTom device.




Carminat TomTom (LIVE)

To reset your device, switch off the car engine and then remove the memory card. Re-insert the memory card, wait 30 seconds and switch the car engine on again.


DAIHATSU,ECLIPSE,TOYOTA


To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Remove the SD card
If your device uses an SD card, remove it.


3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


4.Turn your device on.
Press the On/off button for at least 5 seconds.


5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device.






ECLIPSE II
GO I90
Toyota Aygo Connect Multimedia

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


2.Remove the SD card
If your device uses an SD card, remove it.


3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


4.Turn your device on.
Press the On/off button for at least 5 seconds.


5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device.






Mazda Navigation System NB1 (LIVE)



To reset your device, switch off the car engine and then remove the memory card. Re-insert the memory card, wait 30 seconds and switch the car engine on again.

Sony XNV Navigation Module


To reset your navigation module, first remove it from the cradle by pressing the release button. Then press the reset button on the back of the navigation module for at least 20 seconds. Push the navigation module back into the cradle.




Source

Code:

Please Login or Register to see the links