Thread: Navcore 9.401 Fan Edition

Some of you already had a Navcore that I presented on the TT.
I assume that you liked my work if you had

I think the 9.4xx is so far the best NC I tested on my TT and since I'm always trying to help my fans it time
to give a little "present".
You get all the usual that my NC's offer like:
Low memory usage
Support for many devices
Free of errors
and of course the emulation chenge from the menu.
Only for the 9.4xx NC's : full support for the cphoneme.dat so that now most of the pronounciation problems should be a thing of the past.
The NC is patched, so you don't have to do it.
FastActivate is included in the root so that you can simply add a new map and activate it.
To change the emulation:
Go to the last page of the menu,
click on "Skin Chooser",
do the calibration carefully,
by default the NC uses no emu and starts like it would be made for it,
available emulations are: 18=X20, 24=X40, 25=X30, 37=X50

Known limitations:
Since the NC is designed for 64mb devices, and I have no 32mb device to test,
I could not tell if it works on a low end model - but you can try anyway.
If your device is not supported than it won't boot and hang - since this can happen from a faulty
installation too you should follow the installation instructions carefully and from 1 to 9!
Voice control only works in X40 and X50
Day/Night change by sensor only in X30 in other emulations it changes by time and/or you can use the voice commands for it.
If you don't like the spelling of certain roads, e.g.: "State Route" is pronounced "S-T-A-T-E Route" disable road numbers in the voice preferences.


Added extras:
You will notice

Installation - Please read completely before starting and follow it to the dot!
1. Make a full backup using Windows Explorer and not Home!!
2. Check your backup
3. Delete the following:
All folders except your map folder, the folder "voices", "LoquendoTTS" and "sounds".
All files in the root of your TT/SD except the following:
ttgo.bif and settings.dat
4. Unpack the archive to the root of your TT/SD, confirm to overwrite - all folders will be created for you.
5. If your map is not activated yet use FastActivate in the root, click the first 3 buttons, beginning from the left.
Keep in mind that not all maps have meta codes yet, so check before you install a new map!
6. Disconnect from the PC
7. Start your TT
8. Enjoy
9. Passwort for all: downunder


Update: It was reported that this version actually works on a ONE V1 and gives about 8mb of free Ram!
Download

...dead link removed...9.401_Downunder_Fan_Edition

...dead link removed...
password:- downunder