Hi there
Ok, now I got the info on how to do that, thanks...
But, correct me if I'm wrong, this was only to let the device to read the SDHC card types, right?
So if I've that kind of problem, why is that if I place another earlier version of the navcore in the same SD (4GB) the device boots and works as it should? Doen't that mean that the device already is able to read the card?
If so, why doesn't it boot as it should with tha 9.701 navcore instead of the one that he has? or does this problem only afects the Truck versions of the navcore?
Thanks
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
Hi there...
First of all I would like to thank you for the time you're spending, to help me.
So as you have requested, this is what I get out of option 7 of FastActivate, using a 4GB SDHC card, and that runs on the device (navcore 9.026)
I also tried with the 8.398 truck navcore and it also loads from the card (but of course it does not read the 920 or 925 maps)
You might see the free space bigger than it should be, cause I removed the maps, just as a test, to see if the device really loads with this type of card (even without the maps)
Thanks
ttgo.bif:
DeviceName=TomTom ONE XL
DeviceVersionHW=ONE XL
DeviceSerialNumber=L9xxxxxxxxxx
BootLoaderVersion=55279
ApplicationVersionVersionNumber=9026
ApplicationVersion=483454.1
CurrentMap=
CurrentMapVersion=0.0
Map(s):
Storage:
Size 3714MB, Free 3624MB
"ApplicationVersionVersionNumber=9026"
You're meant to have the truck application/navcore 9.071 on the SD card!!!!
Start again.
Delete everything from the card apart from the ttgo.bif file, add my full 9.701 x00, One, One XL dump (contents of the downloaded rar/folder) add the truck map & rerun F/A option #2
Then insert SD card, boot up & report back again
Remember your device can only run off either the SD card (if inserted BEFORE switching on) or internal memory if there's no SD card in
Last edited by biggerdave; 21st February 2014 at 06:10 PM. Reason: grammer/spelling
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
I did all that you've said, but the info came like this:
As I said earlier, the device hangs on load, after it shows the progress bar, and the truck image. It gets stucked there and the only way to re-run the device is by pressing the reset button.ttgo.bif:
DeviceName=TomTom ONE XL
DeviceVersionHW=ONE XL
DeviceSerialNumber=L9xxxxxxxxxx
BootLoaderVersion=55279
ApplicationVersionVersionNumber=9026
ApplicationVersion=483454.1
CurrentMap=
CurrentMapVersion=0.0
Map(s):
N:\925.5445 - Europe TRUCK 2.54GB\
Storage:
Size 3714MB, Free 892MB
If it serves as any info, before it get stucked, the back light brightens once, I mean, when the device turns on the back light turns on and after a while it gets brighter.
After that the device just hangs.
As you can see, the info on the navcore version is not changed...
Thanks
Last edited by nullsoft69; 21st February 2014 at 07:12 PM. Reason: error on info
It's not reading from the SD card because if it WAS it would boot 9.701 navcore
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
Something is seriously buggered there.
Start from scratch. Ensure internal stuff is running fine then reformat SDHC card, add copy of your internal ttgo.bif, contents of my downloaded folder & truck map then run latest F/A latest again.
Double check you have added the CONTENTS of the downloaded/extracted folder "9.701 x00_One_One XL.rar" and added the actual FOLDER "Europe_TRUCK"
If it still ain't right then you need to try an alternative truck map download
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
Just to test, I'm going to place the 9.701 navcore files directly on the internal storage, in this case without the map, as it does not fit there, but this way I'll test if the device loads the navcore. If so, then, YES it would be some kind of SDHC - truck navcore issue...
I'll post back the results
Last edited by nullsoft69; 22nd February 2014 at 04:34 PM. Reason: spelling
I've tried, and in the internal storage the 9.701 navcore is loaded...
So to conclude, it must be some kind of problem with the SDHC and the navcore, in this case, with this particular device.
I've tried again from a blank card, but the result is always the same.
I'll use the normal navcore (not the truck version) files and then if I do get some error again, I'll post it here
Thanks for all the help
Bookmarks