Hello,
That work fine on my M I O Moov500.
Thank's
The 10 year old iCN510 is just a rebranded Mio 136 (Pocket Pc) running windows ce (4.20, I think). Navman installed their GPS software and locked the system.
It can be unlocked, I am almost sure, but I never did it myself. In the past, there used to be a website about unlocking all Navman devices, however it has folded.
Not sure about this, but their "MOOV unlock" could be the one they used to unlock the 510. If you can find it.
What should be possible to find on the Internet is miopocket. (google)
Miopocket is a heavy program that weights on the devices memory, so it may not be the best choice after all.
Then there is "danibor lanik" who might have an unlock that works.
The device is almost ideal to play with, but don't expect much.
Hello,
That work fine on my M I O Moov500.
Thank's
I have been asked by a friend to see if I can get their Navman S50 working again so it is actually useable, with AU/NZ maps. I have read a lot about what needs to be done but I must be missing something simple and would appreciate confirmation of the details. So far I can connect via usb and copy files but, no matter what I have tried, all I get is the flash pic (lady with head out of a car) showing S50.V1.50.0010 across the top, NAVMAN S50 in the middle and Smart ST TM at the bottom. This screen then swaps for two boxes and a usb symbol with either a two way or single way moving chain dot graphic depending whether it is plugged into the PC or not.
I have plugged an 8Gb microSDHC card into the GPS using a Micro SD card adaptor, and FAT32 slow formatted the card via the GPS. When plugged in via usb the GPS and SD card show as separate drives and files copy easily to either. I have copied the original Navman files off to an external drive and deleted them off the GPS.
Whilst I note comments above saying the pack links in 16 & 17 don't work is the same for me, what I have collected and extracted so far from around this forum is the following:
A) Program Files in post 1 here (399Mb on an NTFS disc) which has two directories being Common Files and Navman, and no separate files
B) [Hochladen.to Dateien - Files kostenlos hochladen]AUS___NZ_-_WhereIS-2014.Q4 (the maps, 266Mb on FAT32) which I do understand need to go in the relevant folders in the content directory.
C) unlock light.rar and Minishell_CLASIC_New_Flash_v1_320x240.rar from posts 16 & 17 which I have done nothing with as the pack file links don't work and I expect they are needed together.
D) iGO Primo2 (9.6.12.243837) (241Mb on an NTFS disc) which has 3 directories being content, license and save, plus 14 files
E) iGO+Primo+2.4+9.6.13.405512+(June+2014) (189Mb on an NTFS disc) which has 3 directories being content, license and ui_igo9, plus 11 files
Original GPS files (136Mb on an NTFS disc) which has 4 directories being Navman, Program Files, PIM and My Documents, plus 4 files.
The GPS Memory capacity is reported as 444Mb by Win 7's Explorer and the SD card at 7.59Gb; both have a volume label reflecting owners name, which shouldn't be a problem? But I obviously have the problem that A) + B) above won't all fit on the GPS. I have tried putting them on SD card (with maps in correct directories) and also on GPS but no maps and the start-up is unchanged. I have added original root files back to no effect.
What I struggle with in my ignorance is I don't see how the GPS is told what to boot as, following the instructions EXACTLY, all there is in root of GPS is Program Files directory. Supposedly (from another post here somewhere) the SD card is a priority boot so I could have iGo Primo on SD card and the original files on the GPS and it would boot to the SD card first, or the original if SD card removed, which sounds a pretty sensible arrgt.
So far I have done nothing with the two iGO Primo files in D) and E) as it is even less clear what to do with them, and they too add up to more than the GPS memory when maps are added in. Could somebody kindly please explain how to put this jigsaw together so it works? Thank you.
Did you read this thread and found no solution?
Then this may be useful, but I do not guarantee it works. Some (long) time ago, Corsea wrote:
Spoiler: text
All credits should go to corrsea !!!
Note: the s30, s50 and s80 are basically the same device, the difference is the memory size and some extras
hi there
thanks "koraby" for this useful thread
i have a navman n212 that i would like to make work and put Igo on it is it possible?
thanks in advance
Hi there
what should i do, i have on my GPS just a folder named Program files, and within i have 3 folders 1.activation 2.navigation 3.system
this is whats within the system folder
Spoiler: screen1
this is whats within the navigtion folder
Spoiler: screen2
The activation folder is blank.
Where should i put the files downloaded from the first post?
Thanks
Last edited by Boki; 31st March 2016 at 10:19 PM.
nothing you call your Program Files in Program Files _original and put my pack you downloaded ProgramFiles .
Bookmarks