You do actually need to be sure which HWID you have, MTK chip [1104] or non-MTK [0972]. However, if you try to flash the wrong .rgn, you would normally get this message from updater.exe:
I take it that you don't have a files backup to check which hwid you have on GarminDevice.xml. Are you sure that you kept your finger firmly in the LH top corner at least until the word 'Loader' appeared on the screen? Moving your finger even slightly or reducing the pressure early in the flashing process can cause it to fail but it's so long since i've had that happen that i can't remember the message. Keep trying, and if you get the same error try to make a screenshot and post it here or write down the exact message. Also re-make the cure rgn from scratch just in case something is corrupt in your first attempt. You could try a cure rgn made from the other fw but i don't think that's the problem.
It's possible Garmin could tell you what chip you have from the unit's S/No., but that may take some time.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
Does that work on 'bricked' device which can't be seen in Windows? I never realised that .. wow!
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
It should work in preboot mode
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
ok i was able to flash with the fix cure after it showed the loader loading software then it finished turned it back on then it showed garmin icon on again tried to formatt drive but RMPrepUSB does not reconize the garmin drive at all so i am stuck again. i am using os win 7 one more thing is that when i turn update loader it sees the unit id and model # when i hold the top left corner but the RMPrepUSB does not
Last edited by joecap; 24th May 2013 at 03:35 AM.
It is recognised by Windows at all? Can you see the internal files system in Win Explorer?
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
no i can not see any system files and windows does not see it either also i just tried to use G7ToWin64 and it doesn't see it either
nuvi13xxand14xxseries_GCDFile__620.gcd is the software that i used to create the rgn cure
Last edited by Neil; 24th May 2013 at 04:36 AM. Reason: Merged 2 consecutive posts. [just use 'edit' button instead] ;)
Did you try with an XP computer as I and popotnik suggested?
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
no i have not because i don't have i xp os computer
Bookmarks