Dear Friends,
I installed a corrupted map on 3790 and the device hanged on loading maps with no usp connection.
then I flashed cure firmware and deleted the map,but the device hanged on GIR version mismatch..
I then Formatted the device and it turned on till select a locale screen with no any selections to chose from!!
Now it hangs on this screen with no usb connection??
is there any software to flash through the updater..?
Thanks for consideration..hany
GIR version mismatch mean you used a wrong resources.bin
If you can get preboot mode then try to flash with your original 3790 firmware.
Dear Catymag,
Thanks for consideration..
Now Im using the updater.exe 2.8.0.0
and I flashed the cure firmware 2.50[Only registered and activated users can see links. ]
it came with cure.rgn and other 250.rgn in the same zip file.
I unzipped them then flashed cure firmware then deleted the corrupted map,then flashed normal 250.rgn but it hanged at GIR mismatch.
Then I formatted the device and now it hangs at select a locale
So I wonder what to do Boss..
Thanks AGAIN,,
Hany.
I think I dont have that software..
Do u have it??
If so, plzzzzzzzzzzzzzzzz forward so that I can get rid of this headache..
Thanks for consideration Bro.
Hany
Dear CatyMag,,
Ive made a cure firmware through Garmin Cure3 using my Gupdate 4.90
then it acted as mass storage device. the garmin driver is free as it was formated before.
then I flashed the normal rgn file made by Garmin Cure 3 too but I marked (original).
It again hangs at select locale screen.
are there files or folders i should copy to garmmin driver using the cure fw.???
and where shall i get them bro..?
Appreciate your efforts.
Hany
Have you tried Webupdater. ? or My Dashboard ?
It sounds like you have USB working fine now.
By the Way - Caty is a Lady - Not a Bro.
Cheers Bro
Thanks for clarification Dasilvarsa,
I was in Johanesburg last october by the way..great country..
I think am almost solved the problem..but wait for confirmation..
your suggestion doesnot work as The laptop and garmin programs recognize the device as mass storage device and not as a garmin gps device.
so, does not make sense to use mapupdater or webupdater..
I figured out other solution inspired from Caty..
So thank Bro,
Caty: Thanks SIS..
hahahaha
Hany
I dont understand clearly what have you done after loading Kunix' cure, but I hope you followed with care this
[Only registered and activated users can see links. ]
and this
[Only registered and activated users can see links. ]
and at the end you loaded the original 3790 firmware as written by my friend Aekhong above.
If not ,try again using the proper method
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
Dear Caty,
Thanks agian..
The problem solved,,but:
Now the device wont show streets layout on the map?!!
I did a garmin mapupdater which loaded the original map that came when i bought the device.
The unit still can speak streets names n guide me to my destination but without streets layout??!!
I tried load other maps using micro SD n still the same issue?![Only registered and activated users can see links. ]
Thanks again sis.
Hany
Bookmarks