Read with care instructions (step by step guide) you must load .rgn in updater.exe before starting nuvi
sent with my phone
The problem is that i can't get into the preboot mode
when i starter up the nuvi510 it's come in the screen whit the logo "garmin" with the tekst "loader loading..."
The computer doesnt also see the nuvi as a masa storage
when i tryed startet up the nuvi into preboot mode i see after 30 sec. a with screen with left under a black point with the tekst "touch dot"
and than i get the screen whit the logo "garmin" with the tekst "loader loading..."
that it's
Read with care instructions (step by step guide) you must load .rgn in updater.exe before starting nuvi
sent with my phone
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
Yes you can, see below[*].
It's trying to load a software [firmware] which isn't suitable for the device or is corrupt.when i starter up the nuvi510 it's come in the screen whit the logo "garmin" with the tekst "loader loading..." ....
Because it's 'bricked' and is unable to load the software, therefore it cannot enter MSM.The computer doesnt also see the nuvi as a masa storage ....
[*]For the 30 seconds before the white callibration screen appears the unit has in fact entered preboot mode. That's the time when you can flash it using Updater.exe.when i tryed startet up the nuvi into preboot mode i see after 30 sec. a with screen with left under a black point with the tekst "touch dot" ....
That's because it's gone back to trying to load the unsuitable software file which it cannot complete.and than i get the screen whit the logo "garmin" with the tekst "loader loading..."
that it's
You said this in your first post:
The program you called 'garmin updater' wasn't Updater.exe in that case i suppose. If that was GarminExpress or WebUpdater which you used to 'upgrade', then it would have loaded a file named GUPDATE.CGD to the unit's Garmin folder and this is probably the file causing the 'loader loading' to be constantly displayed.
It is very important to know which HWID your unit has now. Can you say how you did the nuvi 510 to zumo 220 conversion? Did you flash complete 220 firmware, or was it converted using 5x0 boot.bin and 220 fw_all.bin? If a complete conversion, the HWID is now 1138. If done with hybrid 5x0/2x0 fw it is still 0723. If you are now trying to flash with the wrong HWID boot.bin in Cure3 firmware the flash will not be allowed by Updater.exe using conventional naming of XXXX01000xxx [where XXXX is HWID and xxx is firmware version].
If you are at all unsure which HWID the unit has now, please use [Only registered and activated users can see links. ] in preboot to check it. A backup of your unit's GarminDevice.xml may show the HWID but it could have changed if a flash was forced with the other boot.bin. Best to check it with G7ToWin to be 100% sure.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
resolved,
with the program garmincure3 but it doesn't works to me in windows xp, just i tryed in windows 7 and that works
thanks for you help to me (and sorry for my english)
Works fine in XP [SP3].
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
does this tool support GARMIN 64S?
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
Hi I have a question Can this program work with alpha 100
In theory Cure3 will work to allow access to Mass Storage Mode for any MSM-capable Garmin device bricked due to corrupt files loaded or faulty formatting. I can't recall any previous posts about bricked Alpha 100 specifically however but it should work. If your alpha is bricked just try it and please report results.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
Thanks i can unbrick my nuvi 1250, I had to format the internal memory that had errors in files, then with "garmin updater" I updated the software, installed maps and I again put the unit in "ORIGINAL" mode, and has risen, thank you very much for the valuable information and for your work.
Bookmarks