Speedcam warnings

[dunda]

I really like IGO and I'm using IGO for many years.
But speedcam warnings is something that makes me angry.
I'm using Gjak_Arine skin and I want that IGO warns me just once when I approaching to the speedcam. I hate default behavior with many beeps and sounds.
I know that this can't be handled via menus, but we have to change SYS.TXT. But - it is very hard to change the settings and then drive to see if everything is ok.
What are your recommendations?

I want just one beep in "normal" distance when I approaching speedcam (all types of them are the same for me).
Any idea?

[nens]

This problem is solved!
Go to -
[Only registered and activated users can see links. ]
and you will be satisfy!

[dunda]

Thank you, I will look at it.

[dunda]

I tried with:
[warning]
speedcam_enabled=1
speedcam_warning=1
speedcam_continuous_approach_beep_when_tonal=0
overspeed_min_speech_repeat_delay=-1
overspeed_min_tone_repeat_delay=-1
speedcam_maxdistance_from_road=10

[speedcam_category:0]
activated_spoken_type=none
approach_beep_distances=200
approach_beep_spoken_type=sound
approach_beep_sound="Speed camera"
overspeed_spoken_type=none
warn_distances="150:500,140:500,130:500,120:500,11 0:500,100:500,90:500,80:500,70:500,60:500,50:500,4 0:500,30:500,20:500,10:500"
min_frc=-1
use_road_speedlimit=1

[speedcam_category:1]
activated_spoken_type=none
approach_beep_distances=200
approach_beep_spoken_type=sound
approach_beep_sound="Speed camera"
overspeed_spoken_type=none
warn_distances="150:500,140:500,130:500,120:500,11 0:500,100:500,90:500,80:500,70:500,60:500,50:500,4 0:500,30:500,20:500,10:500"
min_frc=-1
use_road_speedlimit=1

But - there is no beep sound now. One more information - I have Volume/Voice always disabled, but this probably doesn't have anything with beep sound.
I also noticed that Ding slider went to mute after I exit IGO.

[osiris4isis]

But - there is no beep sound now. One more information - I have Volume/Voice always disabled, but this probably doesn't have anything with beep sound.
I also noticed that Ding slider went to mute after I exit IGO.

What happen if you change under [warning]
speedcam_continuous_approach_beep_when_tonal=1

[dunda]

Also nothing.
I also try to enable volume for guide (so all volumes are enabled - not muted), but nothing happened.
I'm sure that there must me something wrong with the sys.txt settings.
What are possible strings for "approach_beep_sound"? I don't find "Speed camera" (look in my sys.txt) for example as a file.

[Brown Dog]

But - there is no beep sound now. One more information - I have Volume/Voice always disabled, but this probably doesn't have anything with beep sound.
I also noticed that Ding slider went to mute after I exit IGO.

When recording audio file in front of the DONG-DONG sound. So that the first he heard and 'voice'. And if you want a DING-DONG then write in sys.txt

[warning]
speedcam_enabled=1
speedcam_warning=1
is_spoken=1

[dunda]

Thanks. I will try that.
It is not easy to try, because you can't DEMO speedcam as far as I know. So, after I change a sys.txt, I have to drive at least 15 km to test it

[D.I.I.]

Or you could add yourself one, or several speedcams near the zone you are and you will save at least some kilometers.

[dunda]

Yes, I know that, but it also isn't very comfortable to drive after you change one flag in sys.txt file .