Thread: iGO Speedcam (DISCUSSION)

iGO Speedcam (DISCUSSION)
speedcam iGO
speedcam iGO skin Primo/ NextGen/ Luna

FAQ briefly in fact

Spoiler: +

For iGO Primo (NextGen) Luna *.txt put files in a folder content/speedcam
Before the update we do not delete it file speedcam.spdb.
File speedcam.spdb updated every time iGO is started.
Large files speedcam.txt they can be loaded at the first start iGO very long on weak devices, Win CE.
Radars do not beep and are not notified in the simulation, but are only visible on the map.


X,Y - coordinates (longitude, latitude).

TYPE - camera type

SPEED

In iGO there are three options for displaying the speed when warning:
- speed in the file;
- the permissible speed on the section of road on which you are moving;
- no speed at all.

X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
48.057311,46.347428,1,60,1,121 - speed in the file
48.057311,46.347428,1,0,1,121 - speed from the map
48.057311,46.347428,1,,1,121 - without speed

DIRTYPE - how many directions does the camera work in: In all=0; In one=1; Both ways =2:

X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
48.057311,46.347428,1,60,1,121 - In one
48.057311,46.347428,1,60,2,121 - Both ways
48.057311,46.347428,1,60,0,121 - In all

DIRECTION - the direction of movement of the car: North=0; East=90; South=180; West=270. By DIRTYPE=0 this parameter has no value.

Format speedcam.txt

X,Y,TYPE,SPEED,DIRTYPE,DIRECTION or IDX,X,Y,TYPE,SPEED,DIRTYPE,DIRECTION

iGO does not read IDX, for this reason, which speedcam.txt format does not affect the operation of iGO

What additional entries can speedcam.txt
Signature, point comments

All signatures and comments, only after the comma
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION, <signatures>
20.555555,30.777777,1,90,1,180, <comments>

fake
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION;
20.555555,30.777777,1,90,1,180, <comments>

These characters must not be in the string (: ; // > etc.)
This results in a circular alert, DIRTYPE =1 or =2
become DIRTYPE =0

IDX,X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
0,20.555555,30.777777,1,90,1,180

IDX,X,Y,TYPE,SPEED,DIRTYPE,DIRECTION;
0,20.555555,30.777777,1,90,0,180

[Only registered and activated users can see links. ]

AND
FAQ speedcam in iGo

Spoiler: +

I have long wanted to explain the use of speedcam in iGo.

spc-speedcam, that is, speedcam in encrypted format.
spc-not signed in spdb.
spc-consists of the main types of cameras with directional signaling.
spc-ASC has a section start and close.
spc-after coordinate matching has an advantage over speedcam.txt.

Speedcam.txt - local dangerous points.
Speedcam.txt-saved in spdb.

Using * spc from two manufacturers at the same time (TomTom, HERE) increases the alarm points by * twice
Pay attention to the date of creation of the spc, it is possible that the value of many points no longer matters.
use any speedcam.spc, from HERE or TomTom. IGO it doesn't matter who does the spc.

Using * spc in combination with * txt.
Perhaps it all depends on the user's desire, which leads to a doubling of the alarm points.

* ASC-Average Speed Camera.
* twice-a relative indicator (the coordinates of two different bases are unlikely to coincide).
* ASC-use one set of start-finish when working with the pongo, wandel skin, so as not to disrupt the notification system with false positives from duplicates.

Two medium speed cameras, no more than that:
the first (beginning of the zone) with a measurable limit, for example 80km / h.
the second (end of the zone) with a speed limit of 5km / h.

SpedcamUpdates.spud
saves all added from the navigator screen speedcam.
SpedcamUpdates.spud the file is stored.
iGO_Luna-->privdocs--->InappShop--->Mount--->speedcam--->SpedcamUpdates.spud
NextGen iGO_XXX-->privdocs--->InappShop--->Mount--->speedcam--->SpedcamUpdates.spud

[Only registered and activated users can see links. ]

Dear friends, Discussion brings a solution to the issue. BUT ! If you showed a movie, screenshots, but did not explain what you did for such a result, then your help is zero. If your advice was not confirmed on other devices, then your help is zero. I understand that with modern technical equipment, it is possible to make any installation, which may lead to confusion. Let's just say that any ostentatious post without explaining the actions is a flood in this topic.

I hope this will help to understand any questions without clogging up the topic with empty posts.

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]