Printable View
What you see on the screen does not matter. What is written in the speedcam.txt file is what actually counts. Also, deleting two points makes no difference for the alerts; you can just as easily create identical coordinates with different azimuths, for example:
OSC separates these coordinates to make it easy to edit points on the map.Quote:
25.906520, 43.756520, 4,90,1,168,
25.906520, 43.756520, 4,5,1,348
After the closure of BBS, the only thing that drivers in Spain are interested in is the position of seatbelt and mobile cameras (also fixed speed cameras). I have noticed that OSC also has it under the name 'Dummy'. In that category, will only those cameras be included or also others? In the tests I have done with route simulation on Android with Lockito, it works perfectly.
I meant: I wanted to say 'camera for phone control and seat belt use'
'camera for phone control and seat belt use' - Yes, that's it. And in other countries, this type of 30, for example, in Italy, corresponds to a surveillance camera.
OSC - Spain, we didn't add many types of alerts to the database, as it didn't make sense. For those traveling from France to Spain, there are enough notification types in the OSC database to avoid receiving a fine.
I continue with my tests, I have downloaded the cameras from Italy and of course it detects them without any problems, I suppose there will be some in other countries, I want to download all the surveillance cameras for my project but it only lets me choose 5 countries. Just like the tolls and tunnels are on the forum, do you think it would be more important to unify all the cameras, not the speed cameras, but the ones that issue fines?
I can provide any advice on the OSC database. Additionally, the OSC topic provides explanations on how to use the OSC database. For example, it explains the types of alerts supported by the OSC database and the limitations of its capabilities. You can still use the OSC database export or the ready-made builds that I provide on the forum.
There are control cameras in Spain and Italy, do you know if OSC has more cameras in other countries in Europe? I download them myself on my computer.
30 Type -I do not have accurate information about surveillance cameras by country. You can download them yourself using the 6 check box at the top called Dummy. Each country or separately for 5 countries. However, you should be aware that different countries may have different meanings that differ from Spain.
Hi guys,
Welcome in my weird zone.
I've just found some erratic and weird reactions of iGo NextGen PAL. Some speedcams are visible on the map, but iGo didn't produce any alert.
When checking the speedcam point, all conditions are present to generate the warning (type, direction, speed, skin, etc).
And the weird thing is that sometimes, I can get the alarm (I made a test with a speedcam). Or if I move the speedcam point for some meters, it can work.
It sounds like a problem with the GPS itself, even if iGo is displaying correctly the position during the navigation.
I tried to modify setting speedcam_maxdistance_from_road and speedcam_max_angle, but it's like if those parameters have no effect with Nextgen PAL (10, 30, 54, 200 : no improvement for speedcam_maxdistance_from_road)
Is their any possibility to check why iGo is not triggering an alarm when approaching to a speedcam point ?
You need to change the radar supplier. And restore all standard alert settings to their previous state.
Lufop - This database is not intended for use in iGO.
[Only registered and activated users can see links. Click Here To Register...]
Hi Andrey,
I'm sorry, but this has no matter with the speedcam povider , settings or usage of EUR+ speedcam version.
After lot of tests, I found the root cause : it's due to autorad and iGo kernel speedcam management :
When autorad is active :
If near a speedcam, but outside its detection zone, the speedcams are deactivated by calling sc_SpeedcamWarningDisabled() in speedcam.lua, iGo marks this speedcam as skipped.
It means :
- when starting the car and iGo in the area of a speedcam
- when stopping in a area of a speedcam (because traffic jam, or red light, etc)
this surrounded speedcam will be skipped by iGo and will produce no alert.
But if we are in the detection zone of a speedcam, we can stop (autorad will deactivate the speedcam) : the alert will raise again when moving.
In that case, when the speedcam is active, iGo is not skipping it.
PS : On Luna, there is no issue.
Ok, I found why only World-PAL-Israel skin version has this bug issue :
MODEL.warning.speedcam_enabled must not be changed by autorad's action.
Only MODEL.warning.speedcam_warning must be maintained by autorad (Luna is doing like that).
Means : auto_radar.lua and the_skin_by_pongo.lua needs a fix :
auto_radar.lua :
the_skin_by_pongo.lua :Code:function sc_start_autorad()
MODEL.lua.TKRadarAuto = not sc_GetSysEntry("autorad", "disabled", 0)
MODEL.lua.TKRadarAutoDetect = sc_GetSysEntry("autorad", "detect", 10)
MODEL.lua.TKRadar22 = MODEL.lua.TKRadarAuto()
-- Luna >>
if MODEL.lua.TKRadarAuto() then
MODEL.warning.speedcam_warning = 0
else
MODEL.warning.speedcam_warning = 1
end
-- Luna <<
if MODEL.lua.TKRadarAutoDetect() < 5 then
MODEL.lua.TKRadarAutoDetect = 5
elseif MODEL.lua.TKRadarAutoDetect() > 25 then
MODEL.lua.TKRadarAutoDetect = 25
end
end
-- Luna >>
function sc_rmupdate_autorad()
if MODEL.lua.TKRadarAuto() then
MODEL.warning.speedcam_warning = 0
end
end
-- Luna <<
Code:function rm_GetAdvancedOverSpeedLimit(speed, speed_limit)
if speed_limit == 0 then
return 0
end
if Plugin:isLoaded("auto_radar") then
-- Luna >>
if (MODEL.lua.TKRadarAuto() and speed < MODEL.lua.TKRadarAutoDetect()) or (MODEL.lua.TKRadar22() and MODEL.navigation.is_in_simulation()) then
MODEL.warning.speedcam_warning = 0
else
MODEL.warning.speedcam_warning = 1
end
-- Luna <<
end
../..
Sounds that it works fine now with the fix (tests in progress)