iGO Speedcam (DISCUSSION)

Hi All, I'm running Android 15 with Igo Nextgen Pongo 9.35.2.262743 with map Here UK 2024.Q4 (241108) and my speedcams show the wrong speeds. I'm using the iGO SCDB - code 1,2,3,4 Europe 07.08.2025 speedcam file which creates the cameras and the speedcam.spdb file no problem. It reports speed limits like 19MPH which is obviously incorrect. Can anyone tell me what I've done wrong and how to get cameras with the correct speed please?

Thank you!

19 mph, there are no such restrictions in the UK. 20, 30, 40, 50, 70 exist.
Send the coordinates of the radar that indicates a speed of 19 mph

Hi Andrey, thanks for responding so fast! There are many many cameras reporting the wrong speeds (seems like all of them are off and they are all strange numbers that are not limits in the UK). Here is an example:
N55.85517 W4.00881

Spoiler: +++

[Only registered and activated users can see links. Click Here To Register...]

This problem has occurred before.
The search function might help.
It might have something to do with the settings:
Regional Settings / Units and Formats / Distance
There are miles/feet or miles/yards.

Quote:

---

-4.008810,55.855170,32,30,0,0

---

- 30 mph, everything is fine with the speedcam.txt file

Thanks Golom, I had it set to Miles/Yards. I have now tried the other two settings, Miles/Feet still shows 19 and Kilometers/meters shows 31 so none of those settings seem to give the correct speed.

Thanks Andrey, I had manually checked the file and saw the same as you, it seems to be correct (as were other speedcam files I tried). Any other ideas I can try?

Clear the content/speedcam folder from all files and upload one file speedccam_scdb_1234.txt
and delete or move the file to another location SpedcamUpdates.spud
on the way:
iGO_XXX-->privdocs--->InappShop--->Mount--->speedcam--->SpedcamUpdates.spud

Thanks Andrey, I do appreciate the time you're spending helping me. I'm not sure I properly understood what you suggested but I did the following: Cleared the contents of the content/speedcam folder and added the clean iGO_SCDB_Western_Europe.txt to it. I then went in to the Internal storage/iGO_Basar/privdocs/InappShop/Mount/speedcam folder and deleted the 0 byte speedcam.spud file and relaunched Igo.
This recreated the both the content/speedcam/speedcam.spdb and the Internal storage/iGO_Basar/privdocs/InappShop/Mount/speedcam/SpeedcamUpdates.spud (at 0 bytes)
Sadly the speedcams still report the wrong speeds.

Thanks again for the assistance, it's much appreciated.

speedсам from scratch with incorrect notification, I need to create the same conditions for the UK to see the result. I think I will do it later.

iGO_World 9.35.2.252374.

Thanks again Andrey. Other things I've tried include:
Starting Igo with no sys.txt as well as the original one that came with the Pongo skin from 2025.07.30
Trying different speedcam.zip files in the UX folder
Using the TomTom maps instead of the Here maps

All gave me the same results.