AlpineNavi iGO_9.6.30.462695

I Tried to OPEN and modify the alpinenavi.exe file but dont know how and what must modify :(. Is too "high" for me.
I have a very good version of IGO Primo for dedicated GPS devices.
This version working good on Alpine Navi with latest maps, poi, tts, tmc all working and active but don work the splitscreen, the volume down, and everytime when the navi start must start this program too ...too much waiting. Maybe combine somehow this version with Giuseppes version or Kolomparuddi?
Where is the "splitscreen" ,volume down settings? In data.zip specified in sys.txt( alpine 500 eu?) ?

there is a data.zip with an exit button
you need the version Primo 9.6.13.405512 Blaupunkt
but the link does not link
can somebody re-uploaded this
[Only registered and activated users can see links. Click Here To Register...]
post 75

data.zip Alpine adapted to use with Primo 2.4 ( 9.6.13.405512 18 Jun 2014 ).
resolution : 800_480 & 480_272
You can switch between NK's or gnd data.zip ( Settings - data Changer )
- Mapchanger
ux-utility :
- Autoskip Next Waypoint SB Alpinedata.zip Alpine adapted to use with Primo 2.4 ( 9.6.13.405512 18 Jun 2014 ).
resolution : 800_480 & 480_272
You can switch between NK's or gnd data.zip ( Settings - data Changer )
- Mapchanger
ux-utility :
- Autoskip Next Waypoint SB Alpine
- Next maneuver overview Alpine
- RoutePlanningMethod Alpine
- Next maneuver overview Alpine
- RoutePlanningMethod Alpine

The link is good but in this version dont work: keyboard, zoom, tts, . With the sys.txt of Giuseppe the keyboard, gps signal work . But the zoom and tts dont work , again.

I found an another very good version , with all working stuff (2015) but is taking too long to start. And the navi wait the gps and after is turning on the screen. Is taking about 15-20 sec to start and the screen is off. Maybe we can modify something in files to make the navi start instant like the original igo software?

in folder CONTENT you must delete every files inside folder SCHEME then every files inside folder SKIN then every files inside folder SPEEDCAM and then every files inside folder USERDATA>POI and every files inside folder USERDATA>USERICON
you can put your files inside SPEEDCAM or USERDATA but every files you put inside = more times for start software so i put inside only what i'm need
In next days i test this version then i write if there are problems or not...i hope...

Have you test it on route? onother problem with not original alpinenavi.exe is that when you have plan a route and you have on monitor radio or cd music, when you must turn or there are speedcams, monitor don't change to navigation and not go down volume of radio but stay on radio interface. You have try this?

Not tried on route, just simulation. No music played with simulation but i see inside of sys.txt the "project alpine" line and in the data.zip folder is a folder named "project config" where is alpine.ini file wich content the sound parameter and the alpinenavi.exe is using this file. Content of file: "[sound]
button_sound=button
reminder_sound=oasis_alarm1
incall_sound=oasis_alarm1
sms_sound=oasis_alarm1
incallknown_sound=oasis_alarm1
incallunknown_sound=oasis_alarm1
nocontrol_sound=""
disabled_sound=invalid
mapclick_sound=mapclick
maneuver_chimes=1
click_sound_on_tooltip=0
dynamic_volume_type=0
dynamic_volume_os_amplification_step=6202389
use_method=2
std_muting_device_needed=0
pause_mp3_sooner=200
resume_mp3_later=200
speech_delay=2200 ; pause_mp3_sooner + guidance_screen_on_sooner

[sound.speech]
delay_msec_between_speeches=600
ebp_event_position=2

[sound.announcer]
overspeedlimit_source=ui
gps_signal_lost=0

[sound.voice]
announce_mapinfo_in_foreign_country=1
;announce_mapinfo_in_foreign_country values 0:names, 1:numbers, 2:maneuver only

[speech_sources]
sources=traffic::restart,warning::restart,recalcul ate::drop,guidance::drop,test::restart,vr::drop,di alogout::restart,ui::drop"
Splitscreen dont work......with any tipe of data. Is a problem in alpinenavi.exe.
Some screenshot and a little video:

Spoiler: IMG+Video:

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

Quote:

---

Originally Posted by lauriluri [Only registered and activated users can see links. Click Here To Register...]

-not existing download

---

this its modifidet ,its not original alpine but the exe its from iGO Primo Honda Civic Reborn 9.6.13.405512,with mofidet data.zip from alpine,check pls.

yes .. and what if changed ?? not working??

The splitscreen is not working and the navi is taking too much time to start. If ignition is on, the player start. When start engine after 2-3 seconds the player is turned off by engine (electrical circuit) then the player must go on imediately. But with this version of igo software, the player is taking about 20-30 seconds to start.
With the original software the player is turning on imediately.

We wait for giuseppe to delete unnecesary files from content folder to see if the turning on time will be short.
The splitscreen is not so important to me ,i can live with this ....but the starting time is too long.

for starting time:

in folder CONTENT you must delete every files inside folder SCHEME then every files inside folder SKIN then every files inside folder SPEEDCAM and then every files inside folder USERDATA>POI and every files inside folder USERDATA>USERICON
you can put your files inside SPEEDCAM or USERDATA but every files you put inside = more times for start software so i put inside only what i'm need


splitscreen is not important also for me but it's important automatic change from radio (or cd or usb player...) to navigation screen when there is a signal (turn or speedcam). I've see your video and i ask you if you can do a test. Make a route like in video then press music buttom. Radio turn on music section and live it there. So you can test if screen turn on navigation when there is a turn or other and then return to radio or not
thanks


I've try also change your data with original data. Software start for a few of second but stop on UIREADY screen
TT....help ;)

Me too tried with original data. Like you....stop on uiready. The modified alpinenavi.exe cannot work with original data. Just with the "modded" data .
Il will try what u say and i will post the result.
If i put the original alpinenavi.exe in this "ALPINE" folder then i have issue on license files .
So the alpinenavi.exe is very important to can work with new maps,poi, 3D , building, etc and with data.zip for splitscreen , volume down , etc.
This is the problem: dont have a good version of alpinenavi.exe (cracked).