Thread: IGO Nextgen 9.19.5.653580 | Speedcam | TMC | TMCPro | TTS Pro | working NX501EA

Crash.txt is always created, because software is cr*cked . It is often talked about it.

Perfect.
Thanks.

Edit: If you're interested, I've put here as having the colored 3d buildings ...
[Only registered and activated users can see links. ]

Possible to decrease the size of all icons visible of POIs (*.poi files) in 3D map view?
I started with "sys.txt" for example:

[Map]
Multi_poi_w=40 ; default value 66
Multi_poi_h=40 ; default value 66

And it works, but the same method, example with "Parking", no.
Some idea?
---------------------------------------------------------------------------------

Update

SOLVED, adjust for your px value...

[Map]
Multi_poi_w=40 ; default value 66 Set ONLY this POI
Multi_poi_h=40 ; default value 66 Set ONLY this POI
poi_w=34 ; default 56 Set ALL other categories of POIs
poi_h=46 ; default 76 Set ALL other categories of POIs

As far as Sound and TTS is concerned, these are my entrys in "sys.txt".
Try and see if you can solve something...maybe change something and try again, adapting to your situation.

Spoiler: sound part

[sound]
pause_mp3_sooner=0
ding_muted=1
enable_waveout_based_ebp=1
waveout_based_muting_fill_value=1
sound_level_0=16383
sound_level_1=28671
sound_level_2=40959
sound_level_3=45055
sound_level_4=49151
sound_level_5=53247
sound_level_6=57343
sound_level_7=61439
sound_level_8=65535
use_method=4
used_byte_in_method=7
use_os_volume=1
os_volume=255
master_volume="255"
csv_voice_enabled=1
effect_volume=255
guidance_volume=200
os_muted=0 ; put 1 -> sound off
maneuver_chimes=0
mute_os_key=1
sound_muted=1
ding=0

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=2

[dynamiccompressor]
compressor=1
ratio=9
gain=9

Maybe insufficient ram memory on your unit?
How much memory do you have?
At least 256mb needed to be safe.
I put the full "Navigation" folder in SD, and nothing else.
After the first start of Nextgen, if everything is ok, it must automatically create another file named "device.nng" in the SD.

And, NextGen WinCE only under very specific conditions and minimal package with just few ux's works in emulator. Put one more file - it will not.

Someone has tried this ux:
"Next_maneuver_overview_NG.zip"
I have tried the standard version, about 4kb, but I only see a small popup on the right, with 2D mappings, almost invisible, at the same time as turning directions ... and no as I saw in some web screenshots, with popup 2D larger.
Also attached to an update version, I did not understand what changed, but with this however it does not seem to work no popup in 2D during the maneuver directions, with ruote enabled.
I attach, someone you try writes after the results.

Edit: should also be seen with route demo simulated, but I doubt emulator functions try live tests.

Has anyone tested live if this zip above work properly, both "standard" and "update" versions?
What are the results?
Build any screenshots, please.

Does anyone download all the *.dll files and right entries to edit in sys.txt,to have TMC running with this version of Nextgen WinCE?
I'm trying to develop TMC hardware and virtual COM...

---------------------------
Update:

my custom TMC hardware work,tested with Igo 8.3 PC version (and old carPC x86 used up to two years ago), but with Nextgen I have problem for load FTDI drivers, or rather, no problem copying the drivers to the WindowsCE directory,regedit this drivers...with mortscript script but I can not understand if the drivers are correctly initialized at startup,and the exact COM\number port that is assigned forTMC hardware (but I hope to understand this...).
The real problem is to have "gpstmc.dll" and its proper "gpstmc.pil" (TMC GNS protocol and WinCE compatible) for Nextgen WinCE, and also how to write entries correctly in "sys.txt" for TMC working.
If anyone wants to help me, maybe we can have TMC with the Chinese 2 din units!