Thread: iGO Primo NextGen v9.19.1.484935

I've installed this NextGen but where's the sys.txt? I go through the initial setup on the configuration, but after that the map just displays with the 'select as destination' option at the bottom bar displayed. I've got no option present to bring up the menu.

Help please.

roadsign_lines_per_screen=25 ;(5) ;(7) ;(15) ;(16) ;(25) ;(30) max streetnames on the screen, affects fontsize in 3D

changing this setting used to change the balloon size with the street names in 3d.now in nextgen and in primo changing this nothing happens.any ideas? I want to make balloons smaller.





Στάλθηκε από το ZP952 μου χρησιμοποιώντας Tapatalk

@fuorigioco1981

In Primo you can change the balloon size by changing the font with this command

[interface]
mapfontscale=300 ;()sets size of font used for suburbs etc in both 2d and 3d, also street names in 2d
mapfontscale3dframed=300 ;()sets size of font used for street name balloons in 3d mode

You will have to experiment with the number - I found 300 gave a good size font on a 720 x 1280 screen

I can't say if it will work in nextgen, I haven't tried it because there are not yet licences for the maps for my country

Good Luck

Originally Posted by k1w1_123

@fuorigioco1981

In Primo you can change the balloon size by changing the font with this command

[interface]
mapfontscale=300;()sets size of font used for suburbs etc in both 2d and 3d, also street names in 2d
mapfontscale3dframed=300;()sets size of font used for street name balloons in 3d mode

You will have to experiment with the number - I found 300 gave a good size font on a 720 x 1280 screen

I can't say if it will work in nextgen, I haven't tried it because there are not yet licences for the maps for my country

Good Luck

yes that's the setting thank you!
one more thing.
in rawdisplay in sys I have ;dpi=160

program looks fine.
my screen is 1920#1080 full hd
should I input a specific dpi number? or now I have it in "auto"let's say?

Στάλθηκε από το ZP952 μου χρησιμοποιώντας Tapatalk

Originally Posted by frontzosd

Dimitri,
Only with code...
As i understood, you want to disable this operation
From the button which is on cockpit.

For example
This code

<BUTTON CLASS="btn_map gps2d3d" ONRELEASE=sc_ChangedCockpitMapMode

Says..we have a button....
When we press it ,we have the opportunity
For 3d , 3d mode

Delete this line

ONRELEASE=sc_ChangedCockpitMapMode...

And you disable this feature..
But i must first found , where it is
Written in code.

Well, your files disabled the button function. I wanted to disable airplane ✈ view and to remain always at 3d. I guess there must be a sys line that disables that...

Sent from my HTC One dual sim using Tapatalk

Originally Posted by frontzosd

The problem was, that we press by mistake the button
On the map...
And it turns to 2d...
Many navigators hate this..

I think
The other
is an application feature...
It s not necessary to disable this.
Because you can stay , all the time in 3 d mode.
There is not any button to press it by mistake...

After by my modification files
Only from Menu
You can return to 2d or 3d

I guess I was not clear enough. My problem is not 3d or 2d. This is my problem : while I am driving on 3d, the button figure turns in to airplane the view is like I fly an airplane. I have to push the button to have car view again. But soon after, the problem returns and I have to push the button again and do on.... I want a permanent car view. Is that possible?

Sent from my HTC One dual sim using Tapatalk

Hi

perhaps try desactivate the "overview" option in Menu

Originally Posted by orvvan

where is the problem sony z2

Spoiler: IMG:

You have wrong licences in the folder: licence
Surely, you must delete all your licence with extension .lic , you must keep only licence with extesion .lyc .
After that, delete folder save and start nextgen again.....

Originally Posted by fuorigioco1981

one more thing.
in rawdisplay in sys I have ;dpi=160

program looks fine.
my screen is 1920#1080 full hd
should I input a specific dpi number? or now I have it in "auto"let's say?

You have the highest resolution, so in your case , the program it is better to use the xxhdpi resolution....
You must delete any line about dpi in your sys.txt, nextgen has by default: dpi=auto

Here is set of six generalized densities:
ldpi (low) ~120dpi
mdpi (medium) ~160dpi
hdpi (high) ~240dpi
xhdpi (extra-high) ~320dpi
xxhdpi (extra-extra-high) ~480dpi
xxxhdpi (extra-extra-extra-high) ~640dpi

If you want to study more.....look here:

Code:

Please Login or Register to see the links

or google it.