the overview setting is the last lines in "camera sections" in sys!
Στάλθηκε από το ZP952 μου χρησιμοποιώντας Tapatalk
I have change the parameters you show me but there's no modification.
Is there another solution to change the "AUTOMATIC 2D OVERVIEW" altitude zoom and distance before next direction?
I've seen it in your sys.txt :
2dheadup=1 ;(1) ;( extra 2d heading/north) ;bird's eye view 2D view you can switch off the automatic switch from 3D to 2D in the sys.txt; (0) not change, (1) Switch
north_up=1
Is it this fonction?
the overview setting is the last lines in "camera sections" in sys!
Στάλθηκε από το ZP952 μου χρησιμοποιώντας Tapatalk
OK, I just changed the "overview_zoom3d" 300 to 3000 on each camera section.
I will see result tomorrow morning.
Thanks for your help and explainations for a beginner...
I downloaded the 25.01.2016 skin .... Has anyone noticed that the Warnings Menu in setup is gone? We lost the option of turning on and off warning messages.
I went back to the previous skin version.
Does anyone know why it was removed?
Slovak Language for lastest pongo skin 25.01.2016.
Hi,
So, after modifiing the "overview_zoom3d" from 300 to 3000 on each camera section, there is no appearant evolution.
The "automatic 2D overview" starts when there is a long road without direction modification but always at the same altitude, and stops when I arrive 3000m before a direction modification.
Hallo,
I'v got a problem with AS 25.01.16, also with alla other vesrsion (wince).
When I start navi, gfx ok, but i hear no sound/voice (like vice off) of course in sys.txt all is 255, and its fine. In options all on 100%.
But when I remove all from UX folder and start Nextgen - voice is fine, works perfectly, and after copy AS 25.01.16 it starts ok. But when remove SAVE folder - all sond is off and i could't on (in option 100% - look ok, but i hear nothing)
what to do ? any clews ?
This I do on start, no change. But find solution for sound problem on nextgen avisync.
IGO_NEXTGEN_01_16\save\profiles\01
file system.ini - have to change (after first setup)
Delete all under [sound] and make now one:
[sound]
alert_volume="255"
ding_volume="255"
effect_volume="255"
media2_volume="255"
media_volume="255"
voice_volume="255"
or just copy.
The worst is that even if you got in sys.txt - no working !!! someone have to change something in avisync !!! some error.
[sound]
working=1
dev_channels=2
dev_bits=16
dev_smp_rate=48000
dev_buffer_size=9216
csv_voice_enabled=1
alert_volume=255
ding_volume=255
effect_volume=255
master_volume=252
media2_volume=255
media_volume=255
os_volume=255
voice_muted=0
voice_volume=255
Problem is that reads everything from sys.ini but not [soud] setting !!!
Bookmarks