Renew an old WinCe5 2din - Macrom M-NV11I77

**maraka** · 20th March 2016, 12:36 AM

Hello to all

Recently I've bought a used vehicle served by a 2din gps : Macrom M-NV11I77
It's running WINCE5 with 64Mb ram.

Which igo navigator I can install on it with recent maps?

Code:

Please Login or Register to see the links

**sylpa27** · 20th March 2016, 09:10 AM

I think you should install the last WinCE Primo 2.4 version (and not Nextgen) which is Primo_9_6_13_405512.
You can find it here.
[Only registered and activated users can see links. ]

**maraka** · 20th March 2016, 03:16 PM

Thank you for the reply, I've tried it on emulator v.5 it crash but it works on emulator v.6 using 800x480 display size.
Sadly it asks for UI Language then loading freeze on "LanguageReady", IGO button is not clickable.
Thank you for directions I'm going to find any other primo 2.4 version inside the forum

**Boki** · 20th March 2016, 06:22 PM

Resolution od your device is 480, but have only 64MB RAM. So, it is recommended to use Primo 2.0. Maybe even version 1.2.
Try with:

Spoiler: link

It is pure software, Primo 2.0 version 9.6.5.306142, add files of your choice: language & voice, maps, pois...
Also, change in sys.txt port and baud rate to: Port - COM1, and Rate - 38400.

**maraka** · 20th March 2016, 06:48 PM

Thank you too for your comment, I'm trying to get things done on emulator. Looks like it works flawless when I'm recalling 480_272 skin but I can't see baseline buttons.
Editing sys.txt with 480_234 makes things crash on boot, looks like there isn't any igo9_ui/480_234 skin over there :\
I think I must stay with 8.3 that's somehow working.

I've also found a torrent with an empty igo9 primo with loquendo TTS support but not working because of skin

Spoiler: Torrent page

**Boki** · 20th March 2016, 06:54 PM

For WinCe is a little different than the android.
You must have supported all resolutions in data.zip file, and also main exe must fully supports them!
Also, it can works excellent in emulator, but it can be total disaster at device. So, trust me, try with version I gave you link for.

If you insist to try, here is 2.4 version 9.6.13.405512 for 480x272 resolution:

Spoiler: link

It will work in emulator, also in device, I've personally made some corrections in data.zip and some other accompanying files.
Pure software, same story, add files according to your needs, change parameters in sys.txt.

**maraka** · 20th March 2016, 06:57 PM

Ok so I'm going prepare two SD cards, one with your version and the other using primo 2.4 with Loquendo, then I try on device.
Maybe they work both.

**maraka** · 20th March 2016, 08:30 PM

Well, after trying all the "recipes" on the device, I've ended up with the same error: 480x234 isn't a valid skin/ui resolution. The only Primo loading language settings startup screen was the 480x272 you posted in Boki_Srb posted in #6 but sadly the "done/next" button was missing from the LCD.

So I ended up I need a 480x234 skin or stay with 8.3

**Boki** · 20th March 2016, 10:53 PM

Aha, finally I found what is your device, this one: [Only registered and activated users can see links. ] ?
Very interesting. It has 800x480 resolution screen, but in navigation mode, works in 480x234 resolution.
You don't need a skin. You need different data.zip.
Then, use package that works, just replace it's data.zip with next one:

Spoiler: link

Tested, works with your resolution. MultiRes data.zip for Primo 2.4

And this one is multires data.zip for Primo 2.0, if you want to try with it:

Spoiler: link

Maybe, if resolution is still, inadequate, add under:

[interface]
resolution_dir="480_234"

and/or

[rawdisplay]
class="landscape"
highres=0
screen_x=480
screen_y=234

**maraka** · 21st March 2016, 09:48 PM

Well! Thank you for supporting with multiview! It solved the issue!

I've managed to load languages, voices and Here 2015.Q3 Italy map

Spoiler: Screenshot 1

Spoiler: Screenshot 2

Now I need to load kml with custom icon, I bet it's easy because I already have a converter script from CSV to KML.

The problem is with speedcam.txt. I have different POI (cameras, mobile cam, semaphores, bus lane, contolled zones) in differents CSV and I have no clue of speedcam categories because are numbered... Is there any index of speedcam_category numbers?

Spoiler: speedcams