sys.txt Descriptions

IGO Primo how do I remove the warning for driving time on trucks?
Regulation 561

u cant, u can only bypass it

add it to sys.txt

[mydata.truck]
max_break_time="00:00:00.000"
max_daily_driving_time="00:00:00.000"
max_driving_time="00:00:00.000"
min_break_time="00:00:00.000"
pre_warn_time="00:00:00.000"

Quote:

---

Originally Posted by bulspan [Only registered and activated users can see links. Click Here To Register...]

HI forum, i have searched but could not find it, I have a Xgody 886 device which came with igo primo, but there is no HELP (lightbulb) icon/option in extra settings. Is there a way to enable it adding some option in sys.txt? thanks in advance!

---

For iGO/Primo, try this

Spoiler: .

Make sure the following is in sys.txt

Code:

---

[interface]
extra_settings=1

---

and for NextGen, you'll need the labs.zip UX

Spoiler: .

[Only registered and activated users can see links. Click Here To Register...]

Make sure you have the following line in the sys.txt
[interface]
extra_settings=1

You do not have to thank :classic:
[Only registered and activated users can see links. Click Here To Register...]

Look at the date of bulspan post.
30.December 2018 ... and not active from 3rd February 2019.
I do not think he is still looking for a solution here

Hello do you have any solution on my problem while playing MP3 or FM Radio on my Head Unit. Igo primo map view is stops responding or hangs while my car is not motion and or sometimes when i'm playing MP3 and switched to another song the software map view stops responding. I tried all versions of Igo but no luck. My temporary solution is to touch the screen to make it working again. Any solutions on the sys.txt file to solve the problem?

[Only registered and activated users can see links. Click Here To Register...]

Based on no information you have left us - as said and discussed so many times - common problem. Browse Forum. Read.

Spoiler: sys part

navigation_audio_stream=3
;0-VOICE_CALL
;1-SYSTEM
;2-RING
;3-MUSIC
;4-ALARM
;5-NOTIFICATION
;6-BLUETOOTH
;8-DTMF

This command is placed in the appropriate section, but we do not know which one because you did not leave which OS your device has.
Usually under: [android]

Add this line, or if exists. try to change values.
Or read unit manual and try to do better setup.

Hello,

I was testing both Becker 9.6.8.265850 and 9.6.8.247703 recently on my Wince 6. However I can't have 3d car or even don't have simple navigation arrow appeared on the map.

Moreover the radio will stop every few seconds without any sound until I need to touch the screen then the sound come alive again. But the sound stops again a few seconds later. I have to keep repeated touching the screen in order to have the sound.

Is this something to do with any Sys.txt that I need to input?

No, it is something up with your unit/launcher
Use "standard" Primo