-
You can try 1460 indo.
Use your original us boot.bin :)
-
Indonesian 1460 has bluetooth. Traffic capability of your unit depends on the combined car charger/FM traffic receiver cable packaged with you US 1490T (probably GTM 25, or maybe GTM 35) and you would need an Indonesian traffic subscription. If you are inexperienced with cross-flashing fw you should do some research before attempting it. For example, you should use the original US boot.bin combined with the fw1_resources.bin & fw_all.bin from Indonesian fw. If not sure, seek experienced advice first.
EDIT: Sorry, I see aekhong beat me to it :)
-
@Neil
Your advice is useful.(I am not good in English)
Its dangerous for 1xxx to face "system software missing" then better to try with original us boot.bin :)
-
I'm not actually understand how to flash using boot.bin and fw1_resources.bin & fw_all.bin, or etc.. Where can i find this file on my garmin? I've been looking for them, but it seems nowhere :D
edit: i'm actually downloading RGN_Tool, gonna learn some. Thanks for the advice :)
-
Yes. You are going on the right way.
Use rgn_tool to extract your us original gupdate.gcd then save as usboot.bin
Extract indo gupdate.gcd then save indofw_all.bin & indoresources.bin
Now you have 3 parts.
usboot.bin
indofw_all.bin
indoresources.bin
Merge them by rgn_tool.
-
@aekhong
Your English is quite OK :). Mine is sometimes too 'long-winded' (overly descriptive) but you would know how paranoid I am about inexperienced people trying to cross-flash, especially with 1xxx/2xxx. However, your knowledge is vastly superior to mine in fw flashing, and what knowledge i do have has been from kind people such as you sharing their experience. I really didn't need to get involved at all, but i thought you'd gone offline. He's in good safe hands with you ;).
-
If you have software missing and your Pc wont recognize nuvi just remove SD or add SD inside and Pc will recognize it ;)
No wory 1xxx never die if you have wrong FW flashed on nuvi.
I flash 37xx FW (original with no change of boot.bin) on 1xxx but i have software missing and then flash back nuvi 1xxx FW and my nuvi still work.
-
How about to force power off while system software missing happen on 1xxx?
My friend don't know about this , he powered off and his nuvi was dead. :)
I just notice that better to keep power on and try to reflash with original firmware. :)
-
Yes,when on nuvi screen write software missing then nuvi whait in preboot and is ready to flash again but if you turn it off when wrong FW is in nuvi then i dontknow what happend becouse i never try this i always try to flash different FW with no power off.
I search for death nuvi series 1xxx to try repair when he wont boot but i cant find death nuvi 1xxx :)
Must be some way to repair this nuvi or we must find out how Garmin add FW in chip.
-
Hi I have the 1300 with FW v 6.10 updated from Garmin site, I have Ire_UK_2013.20. extracted from CN Europe NT downloaded form maps section in forum + speedcams all working great in the internal memory of my unit, no SD card installed at the moment, I have installed JCV file D2504090A that came with the map into the .system folder inside JCV folder but does not show do I need to install the updated firmware..Thanks
