Thread: Edge Explore 820 software summary

Edge Explore 820 software version 9.10
as of June 6, 2018

Code:

Please Login or Register to see the links

(15.16 MB)

Code:

Please Login or Register to see the links

Changes made from version 9.00 to 9.10:

• Smart Notifications: [Android Only] Notifications from additional text-based sources like Google Hangouts will now be shown on device. Responding to these should properly send through the expected application.
• Smart Notifications: Notifications that seemed stale or otherwise are not currently being displayed on the phone should no longer be shown on device.
• Smart Notifications: Notifications from text and phone sources will be automatically dismissed when no longer relevant.
• Turn Guidance: Fixed issue where turn prompts would not be displayed consistently while using 2018.10 maps.
• Fixed issue where Virtual Partner time ahead/behind was incorrect when auto-pause is enabled.
• Fixed issue where turn prompts would not clear until Varia Radar had no remaining active targets.
• Fixed issue where device will not power down properly.
• Fixed discrepancy between wind displayed on the status bar weather preview and the full weather page.
• Added additional information to the Copyright Information page.
• Fixed incorrect truncation of course point names on the course point list page and on the map.

Edge Explore 820 software version 10.00
as of August 28, 2018

Code:

Please Login or Register to see the links

(15.34 MB)

Code:

Please Login or Register to see the links

Changes made from version 9.10 to 10.00:

• New Feature: Added Connect IQ 3.0 support.
• Added enhanced support for Varia RTL510 radar tail light. As part of this, all ANT sensor processing code has been improved and should be more reliable.
• Updated the manual activity upload UI. It will no longer be available if the auto upload setting in GCM is disabled, as this prevents GCM from accepting our upload. If auto upload is enabled, it should correctly reflect success when the upload completes.
• Fixed issue where the Edge would no longer connect to old iOS devices after version 9.00's Bluetooth rework.
• Added UI to inform users of the impact of brightness and backlight settings on battery life.
• Added tip to remind users to remove their bluetooth connection from the phone's settings after performing a forget phone action.
• Fixed issue with the device where going into mass storage from a power off state may cause Garmin Express to offer a map update that the device does not need.
• Fixed issue where going into mass storage mode would sometimes be detected as an unrecognized device until unplugging the unit and trying again.
• Fixed issues preventing device-to-device transfers from completing and made improvements to the connection flow.
• Fixed potential crash on the compass page.
• Fixed issue when renewing the phone connection (not common) would cause the Edge and phone to forget each other after a reboot.
• Fixed potential crash when processing audio prompts.
• Improved missed call smart notification UI to more reliably show the phone number instead of 'Unknown'.
• Cleaned up some of the sensor found notifications that could occur in the middle of a ride.
• Fixed battery low prompts for radars when connected as a radar and not included in a light network.

Edge Explore 820 software version 10.24 Beta
as of November 8, 2018

Code:

Please Login or Register to see the links

Download (10.00 MB)

Code:

Please Login or Register to see the links

Changes made from version 10.00 to 10.24:

• New Beta Feature: Galileo satellites. There is now support to use the Galileo network of satellites to assist in getting GPS fixes. With the correct GPS firmware, this option can be enabled by selecting GPS+Galileo in the GPS setting. Sync the device with Garmin Express to make sure that the new line of GPS firmware is provided to the device. Without this, the option will not be available.
• Updated smart notification categories. In the phone settings, social and other smart notification categories can be enabled. This will make the Edge show notifications from other applications depending on how they are categorized by Garmin Connect Mobile. Apps like WhatsApp, GroupMe, and Twitter may show up under social and things like e-mail, calendar, and news may show up under other. These categories are off by default and must be enabled to be seen.
• Fixed an issue causing cadence data dropouts.
• Fixed crash when doing a calculation with automotive routing selected.
• Added ability to select CIQ data fields on the map page.
• Added prompt to indicate when a course has more course points than are supported by the device.
• Added ability to stop the course from the course review page of the active course to make it easier to reactivate a course.
• Updated the incident detection interface to better indicate when the user is trying to dismiss the page by holding the specified area.
• Added the current software version to the power on page.
• Fixed issue with device transfers.
• Added a minimum scale to the altimeter page so that small elevation ranges are reflected properly.
• Minor graphics improvements.
• Minor bug fixes and stability improvements.

Edge Explore 820 software version 11.00
as of January 9, 2019

Code:

Please Login or Register to see the links

(15.38 MB)

Code:

Please Login or Register to see the links

Changes made from version 10.00 to 11.00:

• New Beta Feature: Galileo satellites. There is now support to use the Galileo network of satellites to assist in getting GPS fixes. With the correct GPS firmware, this option can be enabled by selecting GPS+Galileo in the GPS setting. Sync the device with Garmin Express to make sure that the new line of GPS firmware is provided to the device. Without this, the option will not be available.
• Updated smart notification categories. In the phone settings, social and other smart notification categories can be enabled. This will make the Edge show notifications from other applications depending on how they are categorized by Garmin Connect Mobile. Apps like WhatsApp, GroupMe, and Twitter may show up under social and things like e-mail, calendar, and news may show up under other. These categories are off by default and must be enabled to be seen.
• Fixed an issue causing cadence data dropouts.
• Fixed crash when doing a calculation with automotive routing selected.
• Added ability to select CIQ data fields on the map page.
• Added prompt to indicate when a course has more course points than are supported by the device.
• Added ability to stop the course from the course review page of the active course to make it easier to reactivate a course.
• Updated the incident detection interface to better indicate when the user is trying to dismiss the page by holding the specified area.
• Fixed issue where the GPS data field did not match the GPS indicated by the status bar.
• Fixed issue when coming out of mass storage mode that could cause a crash.
• Added the current software version to the power on page.
• Fixed issues with device transfers.
• Added a minimum scale to the altimeter page so that small elevation ranges are reflected properly.
• Fixed elevation zooming issue with large courses/activities/segments (>100mi or km).
• Updated radar tone to be easier to hear.
• Minor graphics improvements.
• Minor bug fixes and stability improvements.
• Minor CIQ improvements.

Edge Explore 820 software version 11.01 Beta
as of April 23, 2019

Download (10.04 MB)

Code:

Please Login or Register to see the links

Changes made from version 11.00 to 11.01:
• Improved calorie calculations.
• Fixed issue where radar would not automatically reconnect after being disconnected for more than 2 minutes.
• Updated RTL510 and RTL500 light modes for Auto and Trail modes.
• Fixed Varia lights not activating when starting an activity.
• Added the option to choose the radar alert tone.
• Fixed an issue where setting the device language through Garmin Connect would result in the language defaulting back to English.
• Fixed an issue where going through the data screen flow would automatically enable the screen.

Code:

Please Login or Register to see the links

Edge Explore 820 software version 11.10
as of May 7, 2019

Use Garmin Express to install this file.

(15.47 MB)

Changes made from version 11.00 to 11.10:
• Improved calorie calculations.
• Fixed issue where radar would not automatically reconnect after being disconnected for more than 2 minutes.
• Updated RTL510 and RTL500 light modes for Auto and Trail modes.
• Fixed Varia lights not activating when starting an activity.
• Added the option to choose the radar alert tone.
• Fixed an issue where setting the device language through Garmin Connect would result in the language defaulting back to English.
• Fixed an issue where going through the data screen flow would automatically enable the screen.

Code:

Please Login or Register to see the links

Edge 820 software version 11.11 Beta
as of May 28, 2019

Download (10.69 MB)

Code:

Please Login or Register to see the links

Changes made from version 11.10 to 11.11:
• Fixed a crash that could occur when riding with a cadence sensor.

Code:

Please Login or Register to see the links

Edge Explore 820 software version 11.20
as of June 5, 2019

Use Garmin Express to install this file.

(15.39 MB)

Changes made from version 11.10 to 11.20:
• Fixed a crash that could occur when riding with a cadence sensor.

Code:

Please Login or Register to see the links