Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Sep 2012
    Location
    Poland
    Age
    49
    Posts
    15
    Rep Power
    0

    Default Next serious problem in Kenwood DNX7240BT (navi part)

    Hi guys.

    After almost 3 years of trouble-free operation, my Kenwood again broke down. One day, when I wanted to turn on the navigation, it showed only a black screen. The problem seems serious because after searching the internet I not found any solution. Most suggest dispatch to Kenwood, or purchase a new station.
    I have nothing to lose, so decided to fix unit. I have appropriate facilities for the repair of electronics, and I hope that with your help we fix the unit.

    We also have now a similar topic in a forum:

    [Only registered and activated users can see links. ]

    So it is my Garmin navi board:

    [Only registered and activated users can see links. ] [Only registered and activated users can see links. ]

    SRC+ATT+RESET and press INFORMATION buton:

    [Only registered and activated users can see links. ]

    What have I done so far?

    - Update navi board from the CD - failed,
    - no reaction for Updater,
    - I have wires on the outside of the unit as the topic:
    [Only registered and activated users can see links. ]

    Attempt to enter the pre-boot by shorting wires – no result.
    PC completely doesn't see the unit via USB.
    I know that the last way is programming iNAND out of navi board. BGA is not a problem for me, but I have no programmer. It is so expensive.
    Important question;
    Is the navi board from other Kenwood unit will be fit? Of course the same connectors in the same places.

    Thanks for any help;-)

  2.    Advertissements


  3. #2
    Kenwood Moderator Next serious problem in Kenwood DNX7240BT (navi part)Next serious problem in Kenwood DNX7240BT (navi part) ORAK's Avatar
    Join Date
    Oct 2009
    Location
    Romania
    Age
    54
    Posts
    84
    Rep Power
    240

    Default

    You have installed the USB drivers for Garmin?
    Please uninstall the antivirus, if you have antivirus installed, then install the Garmin USB drivers and then reboot the PC.

    [Only registered and activated users can see links. ]

    Those software for this Thread: [Only registered and activated users can see links. ] are only for DNX9260BT and DNX7260BT they can not be used to DNX7240BT.

    You are here software used only for DNX7240BT :

    1. - [Only registered and activated users can see links. ]

    2. -
    [Only registered and activated users can see links. ][Only registered and activated users can see links. ]

    3. -
    [Only registered and activated users can see links. ]

    You can connect only the GPS module to USB port in Pre Boot mode, without the mount gps module back in the unit Kenwood for recovery.
    Last edited by ORAK; 23rd June 2015 at 08:19 AM.
    By ORAK (ex baghdadvaio)
    ______________________________________________________
    |__________00 01 02 03 04 05 06 07__08 09 0A 0B 0C 0D 0E 0F |
    |00000000__4E 65 67 6F 65 73 63 75__20 56 69_6F 72 65 6C 20 |

    Garmin Nüvi 755LMT -->> Garmin Nüvi 3590LMT

  4. #3
    Member
    Join Date
    Sep 2012
    Location
    Poland
    Age
    49
    Posts
    15
    Rep Power
    0

    Default

    Hi.
    @ORAK

    You have installed the USB drivers for Garmin?
    Yes, I installed correct drivers, but I have to try uninstall antivirus.

    Those software for this Thread: kenwood dnx9260bt mass storage deleted are only for DNX9260BT and DNX7260BT they can not be used to DNX7240BT.
    I know that it's different soft, I have prepared my own, but thanks for links. I will try with Your too.

    You can connect only the GPS module to USB port in Pre Boot mode, without the mount gps module back in the unit Kenwood for recovery.
    Good point. I didn't know that. Much more comfortable;-)
    Really thank You for help. I will try afternoon and I'll let you know, now I'm in work;-)

    EDIT

    OK, I did everything as You told. Unfortunatly, still no progress. PC doesn't see the garmin navi. (Now I trying navi out of unit) I can attach navi to USB port with or without short wires and completely no reaction in PC (laptop)
    I afraid it is time to start search broken kenwood with good navi on the ebay;-(
    Not good news, have You got any ideas?
    Last edited by Toretto; 23rd June 2015 at 07:07 PM.

  5. #4
    Member
    Join Date
    Sep 2012
    Location
    Poland
    Age
    49
    Posts
    15
    Rep Power
    0

    Default

    So, i did the same on other laptop. Laptop still doesn't see the Navi board. Two ways - corrupted flash or electronic problem on board. Unfortunately i can't find circuit scheme the navi board in the net. Maybe someone have similar?

    In the meantime i start compare circuit diagrams other units with my. For this moment i see the navi board from 7220 doesn't fit to 7240. Different connectors to main unit board.
    I'll go to tamper;-)

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •