Thread: Garmin Logo.bin files (12/13/14xx-37xx-34xx-35xx-22/24/23xx-760-30/40/50-200-2x5w-Montana etc)

Originally Posted by odelacruz

If this is the case that all nuvi logos are in region 16, is it safer to use Updater via microSD card as below?

To read/extract current logo (content of update.txt):
rrgn,16,1:/16.bin
reboot

Rename the downloaded logo to 16.bin then load as follows(content of update.txt):
xrgn,16,1:/16.bin
reboot

It looks correct

That's good to know.

Can anyone point me to where I can find the index of other garmin regions?

So far I only know region 41 for the bootloader, 140 for the enable features and 16 for the logo. What are the rest and how are there?

Originally Posted by catymag

It looks correct

Nuvi 37xx BMW logo

Originally Posted by mramen

Hi, I want to change my Nuvi 50LM boot logo from suzuki to default, My HWID is 1513 software version 2.30, but in firmware section I get HWID 1350 so I cant continue with this tutorial. Where can I find 2.30 with HWID 1513?

You must use the right boot.bin [ldr.bin] to flash a new logo to region 16 as you realise, ID fw for nuvi40 HWID1513 is available here: [Only registered and activated users can see links. ].

I notice the software is ver 4.0 now, but why when I'm update with Launcer.exe from Garmin it updating to 2.30? Is it because my region? (Indonesia).

It is V4.0 for US/EU HWID1350 [don't use it]. Latest for ID HWID1513 is V2.4:

Code:

Please Login or Register to see the links

I don't know why you are only being offered 2.30 for it.

You should update to V2.40 before doing the logo flash to change to the Standard Garmin splash screen. Extract the attached file directly onto a clean microSD and insert into your 40 with it fully OFF. Turn it on and wait for the flash to finish and for the unit to reboot before removing the card. If will show the standard flash screen on rebooting:

[Only registered and activated users can see links. ]

Spoiler: Click to View

[Only registered and activated users can see links. ]

In Garmin\Backup folder you'll find Suzuki_logo.bin file. Keep it in a safe place in case you wish to return the unit to it's original splash screen. If you have any problem with the unit after the flash, post again with a rar or zip upload of your Suzuki_logo.bin from Backup folder and i'll make another new logo for it based on your current logo.bin with the standard garmin bmp files written into it.

This logo work on nuvi but gir_editor dont show correct.
I know about this in gir_editor

User who provide this logo, try flash this logo back on nuvi and report, that on nuvi work perfect

p.s.
Before Turbo create gir_editor, somewhere was tutorial how to extract logo with hex editor, but i cant find.
Maybe some user from Noeman will extract this picture with hex editor

Originally Posted by lolypop000

Before Turbo create gir_editor, somewhere was tutorial how to extract logo with hex editor, but i cant find.

May be here ?

Spoiler:

Code:

Please Login or Register to see the links

No, this is:

Spoiler:

Code:

Please Login or Register to see the links

In this Thread we learn how to enable function over logo