I'm trying to find out where exactly it is. It's realllly not obvious who did what and what worked for X model/version and so on... I'm so far at page 9 out of 11 and still haven't found a solution. I'll keep on reading -_-Quote:
Originally Posted by catymag [Only registered and activated users can see links. Click Here To Register...]
If you first create backup of your region 41 then all will work again like charm, if you don't have backup of region 41 then you have problem, after repair you will lose model number and we still don't know how to repair model number.
Is it the same thing (Region 41) and (41.bin) as I only have the second one. So I must make a backup right now before I use the (For backup and erase reg41 for nuvi 24x5, 25x5) zip or currently with my "modded & outdated 140.bin" that I've found on the net and GTM broken, it's too late already to make the backup? I'd like to know before using the back/erase thingy not to permanently scew my gps :/Quote:
Originally Posted by lolypop000 [Only registered and activated users can see links. Click Here To Register...]
Here's the files the backup did for me.
Note by Mod link removed because it contains device ID , too personal to shre in public forum, lolypop will send you a pm
I think you must erase your actual region 41 (it has TMC not enabled) with files in post n 54 and then load your original reg 41 backup you have already done before (41.bin), it contains your nuvi infos to restore. How to here [Only registered and activated users can see links. Click Here To Register...]
The traffic stopped working for my 2555LMT when I first tryed modding the 140.bin to unlock ecoRoute Standard but after using the files from Lollypop which included a perhaps more recent 140.bin file and my backup of my own 41.bin, it worked again with the GTM26-36 cable so it should be fine for everyone else too.
Hello for all,
My GTM 36 is working with Nuvi 3597 in Traffic BR
A curious thing happens with the GTM 26 and 36: they do not work with Jetmouse signature on gps Garmin with firmware 2012 (34/35xx, 2xx5), but works with previous (1xxx, 37xx) and now, according to reports of Tadferreira, with 2013 (3597 ..), that is good news. Interestingly is that the GTM 60 works with gps 2013 but it, in the latest firmware version, does not work at all with the GPS 2012. After some work, I did a change in the firwmare of GTM60 to enable traffic with Jetmouse signatures with gps of 2012 (34xx, 3590..). So that appears someone that need, I will publish this firmware.
You can publish it because we do not know that will be happened tomorrow :) In any case it is very interesting as fact for investigation...
It's true ... I can die before and the "formula" would go to the tomb with me.. :ahahah:
With at least one interested person (you), I can now publish. I made this modification long months ago, do not even remember the details, but do not have anything extraordinary. I'll prepare the material, images, version, etc. .. and put soon, I hope before of a ultimate tomorrow, lol..
Here: [Only registered and activated users can see links. Click Here To Register...]Quote:
Originally Posted by Giomen [Only registered and activated users can see links. Click Here To Register...]
I apologize for the delay. Despite having the firmware of GTM60 duly changed since last year, the implementation in practice was done at a distance to a friend who lives in another city and that couldn't enable jetmouse signature in GTM60 of a nuvi 3590, according to images posted in this link: [Only registered and activated users can see links. Click Here To Register...] (post 614)
So I waited the arrival of my newly acquired 3597 LMTHD with GTM60. With it in hand I could redo all tests personally to have more security in my conclusions. In addition I also have a 3490 for help.
The fw that came with the GTM60 is 2.10, exactly the same of the GTM of my friend. Thus it would be expected that my gtm60 have the same symptom that happened with gtm60 of my friend, ie, the signature could install normally but the receiver not tuned, showed error (see link). To my disappointment my GTM60 did not present the same mistake in 3597, was seeking the tune without tune, which is normal because I had not installed the signature yet, unlike what happened with the GTM60 in 3590 (then with 7.90 fw) of my friend, which allowed to install the signature jetmouse but the receiver did not search (in the Traffic Receiver Status screen, Rcvr mode of 3590 appeared 12-Error(.
From "older" information of other users, the GTM60 accept signature jetmouse normally, but another surprise: with the GTM60 plugged in 3597 (with firmware 4.20) all options related to inserting cable subscription were unavailable (appear in light grey). It was not possible to even have access to the cable ID, as typically occurs. In other words the gps firmware does not recognize the cable as GTM60 receiver, just as power cable. I found 2 solutions for this problem then: the first is to install the firmware already prepared ( luckily he has a utility). In reality it is only the 2.00 firmware, modified to 2.17, but with checkusum FE identical to the Garmin, what chance a quiet installation without any problem, exactly as if it were original, just copy to the RemoteSW folder. I changed this fw with tips and a tool of Giomen, tks! With this firmware installation the options Traffic appear normally on the gps and it is possible to install the signature. This problem occurred on my 3597 and with another user of a forum that had just bring a USA model identical to mine. Two cases with gps of the same origin, which allows asserting not be an isolated case.
The second solution is the most practical, since you have an older Garmin model available. Simply plug the cable GTM60 on a nuvi oldest (13xx or higher), in my case in a 3490, which installation options will appear normally. After the installation simply plug in all 3597 back to work, and traffic tuning options. Interesting is also that even deleting subscriptions Jetmouse options to reinstall them now are available at 3597, perhaps because the only signatures were hidden and not erased. This procedure has also been tested in practice with GTM60 in virgin cable of a nuvi 3597.
As a conclusion of my experiences can confirm once again that there is a direct relation between the gps firmware and the firmware of the cable GTMxx. it is not clear the different symptoms on 3490 and 3590 with the same firmware from GTM60, despite the 3590 firmware be olderr (7.90) to the current (8.20), on occasion of the test.
Another important detail: we know that there are differences among the firmwares of same models of garmin gps 2012 and 2013 for the market of the Americas and Europe/Australia. So far I have not read any user complaint on this issue, so it may be that he or refer versions of America or, more likely still, which is a specific block to Brazil or another. I believe that because there is a new field in Diagnosts Page of 3597, Developer Info/Traffic Receiver Dashboard which identifies the Country Code and Ecc, which defines exactly the country, may be that the identification activate this specific block. I have the impression that the Garmin has a certain fear of hackers in my country, but unfounded. The great *****ers are in Russia. lol ..