Isn't it displaing JCV? BTW if you wait till tommorow I can post the logo of the 660 and most probably this feature will be enabled through changing the header of the logo.
Cheers,
Hi, is there any possibility to enable JCV for Zumo 660? I'm thinking of mixing other models' f/w with the boot.bin of the Zumo with Mal/SG (JCV enable) fw_all.bin and fw_resource of other model. Thanks in advance
Isn't it displaing JCV? BTW if you wait till tommorow I can post the logo of the 660 and most probably this feature will be enabled through changing the header of the logo.
Cheers,
Ok, here it is...The logo is the same as the one for nuvi 2x5w. Unfortunately I am not sure is the JCV function available in the FW of the zumo 660 EU/US. Needs experimenting. The logo needs changing in the header to be enabled JCV. Better ask the guys in that topic for their help:
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
...otherwise...other firmware...
So the files need the header to be change first before it can be incorperated in the modded/custom firmware. Really appreciate the help.
I have Zumo 660 with 4.20 firmware and JCV is displayed perfectly when is necessary. I have City Navigator 2012.20 Europe. File D2504050A.JCV for this version, must be inside of Garmin\JCV\. JCV file is the same for nuvi 37xx. Garmin\JCV\ folder must be on Zumo memory not in SD Card.
Last edited by nachoardilla; 17th August 2011 at 04:37 PM.
Bookmarks