You can add all the maps you want in "Map" folder in sd or internal memory , named anyname.img .
If you dont have the "Map" folder in internal mem. you can create it.
hi i have a 3790t whit nort america 2011 map on the device and europe 2011.40 on sd card my question is can i put cityxplorer map on the device or sd card and leave the others map in place
thanks
You can add all the maps you want in "Map" folder in sd or internal memory , named anyname.img .
If you dont have the "Map" folder in internal mem. you can create it.
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
thanks for the fast anser but whent i create the folder on sd card and put the mat in it my 3790t dos not see it and on my device i dont have the map folder
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
yes the map is unlock,on sd card i have europe 2011.40 and when i create the map folder on sd card in garmin folder and put tha map in it i dont see it on tha device
Hello
I have obtained the cityXplorer Brisbane 37xx which is supposed to run on nuvi 1450. it is installed on sd card in the map directory. I unlocked it using Jetmouse with FID800 and PID 2. The map shows on the loaded maps on my satnav. However when selecting mode it does not show "powered by cityXplorer" under pedestrian mode. and when trying to run a simulation it shows a normal pedestrian itinerary. Have i loaded the correct map?
Does anyone know of the cityXplorer maps where countries include transit buses, trains etc as not all cityXplorer maps contain such data.
Many thanks for your help
Keep up the great work.
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
hello catymag
many thks for your reply and all your work on other threads. I have unlocked the map using FID 800. Again it says loaded in map info but there is no other indication that cityXplorer is used.
i dont have this message "your nuvi will ask if you want to abilitate CX features and you'll have this in your nuvi transportation mode menu"
I am using the 2012.20 sensis map, also my internal map is aus and nz nt 2012.10. I turn off the internal map and only load the cityXplorer but dont seem to get any enhanced features.
thks again
reasons why your map couldnt work:
1.-you used a wrong unit id
2- the .unl file has a wrong name. correct naming example :BrisbaneCX.img + BrisbaneCX.unl (same name,different extension)
3- wrong path- Correct path example :sd/Map/BrisbaneCX.img + BrisbaneCX.unl
4- wrong map : in 37xx series and newer just FID 800 tweaked maps work
5- wrong FID generated .unl - correct FID is 800
6- wrong tweaked file : download from pop222's CXs with FID 800 for 37xx series original post on Noeman.
PS: in other CX compatible models, you can use also normal locked maps ,but you have to add an .unl file
made with the map right FID and PID 2, as explained in my thread linked above-
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
Bookmarks