try this
[gps]
port=1
baud=38400
source=nmea
set_messages=0
Hello,
I use Igo 2.4 9.6.13.405512, i have a problem with gps signal.
This is the gps section in my sys:
I get gps signal and after a few minutes the gps is lost and after a few minutes its come back.Code:Please Login or Register to see the links
Can anybody help me?
try this
[gps]
port=1
baud=38400
source=nmea
set_messages=0
Last edited by kikindos; 15th September 2015 at 11:11 AM.
Where you came from with these values? It's a blind shot if you don't know the hardware or device brand. There are many different devices with many different GPS chips and these values differs regarding to the specific hardware. If it's no-name Chinese gps device, than I suggest that you temporary install iGO8 and go for "auto-detect GPS" settings under options and you'll get your answer after successful gps port/baud detection.
Last edited by janch; 15th September 2015 at 02:37 PM.
uckagit, on WinMob that's how it is.
You can try :
- calibrate fix from app : Extra Settings ( hour glass ) - Calibrate Screen
or
- use [Only registered and activated users can see links. ] with his utilities ( esc.exe )
or
- use ux-utility [Only registered and activated users can see links. ]
On sys.txt add :
[GPS]
port=auto
baud=auto
[utility]
calibratefix=1
Last edited by costas3850; 15th September 2015 at 03:15 PM.
Bookmarks