Recover device and remove red cross
[Only registered and activated users can see links. ]
TomTom device locked on boot, blade flashing red X
If your navigation device is locked after you switch it on
Or the TomTom application is not installed or can not be found .
Or the device only shows the boot image or a cross that will not stop blinking.
To resolve this issue , reinstall the application. Follow the steps below .
1. Reboot the device.
2. Connect your device to your computer.
Then turn on the device by pressing the power button for 5 seconds.
TomTom HOME starts .
In HOME , click Manage my device navigation .
Select the Themes tab of the device and check the box applications. Then click Remove items from device .
Click OK .
Select the Themes tab Computer and tick Applications .
Then click Delete equipment items .
Click OK .
3. Reinstall the application by clicking Update my device .
Click Update my device.
Ensure that the new application is selected , click Update and install.
Click Device > Disconnect Device .
Your device starts and then connects to the computer again.
Note: On some devices you may need to repeat these steps .
4. Run the TomTom Clear Flash tool
Note: This tool can not be used with TomTom ECLIPSE , Daihatsu and Toyota 's you can download . :
Spoiler: download
mirror
Spoiler: download
5. Safely disconnect the device.
This tutorial shows although web-tomtom I've copied the master jenito and no link to download it here.
I hope this helps you serve is my intention.
Last edited by QUIN1965; 14th May 2014 at 02:59 PM.
Bookmarks