Garmin Nordics directional alerts for StreetPilot

[osiris4isis]

As promised from the polling thread, with 2015Sept28 release of Cyclops speedcam data (thanks kenta2)
Unfortunately, Nordics update is lagging and update is only from Sept23
[Only registered and activated users can see links. ]

I would like to keep this thread only relevant to Nordics alert issues. I'm in the middle of enhancing Section alerts per discussion in this thread [Only registered and activated users can see links. ] and will rebuild when done.

Built with Cyclop 24x24 icons and Tone (dingding). Each alert has name (searchable) and description. Size is around 115MB.

Total groups added to GPI: 1
Group ID "Speedcam" contains 6 categorie(s), 0 audio alert(s), and 6154 POI(s).
Category ID "Fix" contains 2461 POI(s).
Category ID "Mobile" contains 555 POI(s).
Category ID "Redlight" contains 2 POI(s).
Category ID "RedlightSpeed" contains 26 POI(s).
Category ID "Section" contains 33 POI(s).
Category ID "Speedcam" contains 0 POI(s).

Spoiler: .

[Only registered and activated users can see links. ]

Instructions:
1. Put .gpi file under the ../Garmin/POI directory
2. Make sure "Custom POI's" is checked under Settings->Proximity Alerts->Alerts
3. Search for alerts under Where To?->Categories->Alerts Nordics by osiris4isis

Exclusively on gpspower.net so password is same.

[Giomen]

Mapview send me to store for more Gb

[osiris4isis]

Mapview send me to store for more Gb

Yep, those .jpg's take space (look at Italy size) I might build another set without the .jpg's later.

Update: Here is the build with out the .jpg's Do not use both at same time or you'll get double alert or worst.

Spoiler: .

[Only registered and activated users can see links. ]

[Giomen]

Do not work properly on GPSMAP 62. I could see only a pair alarm after passing videocam...