iGO 64-bit for Trucks [discussion]

**Andrey Form** · 14th November 2025, 12:03 PM

A discussion topic about using 64-bit iGO in Truck navigation.
Settings, capabilities, and tips.

[Only registered and activated users can see links. ]

iGO_Avic_v9.35.2.227616 64 bit — [NOT RECOMMENDED FOR TRUCKS / TIR]
Technical note: The routing core of this branch has a critical architecture bug regarding HERE maps truck attributes. When toll road avoidance is enabled, the engine incorrectly interprets mandatory electronic toll matrices (like e-TOLL, Toll Collect) as complete road blocks, resulting in absurd 2000+ km detours. Switching to TomTom maps eliminates detours but completely blinds the engine to physical truck restrictions (weights, dimensions, low bridges), making it highly dangerous for commercial driving.

iGO_Basar_9.35.2.262743 64 bit — [NOT RECOMMENDED FOR COMMERCIAL TIR LOGISTICS]
Technical note: This branch was originally developed by NNG under a regional OEM contract tailored strictly for passenger car navigation. Although it may display .ftr files as "active" in the content menu, the core executive code is heavily modified and lacks full truck toll matrix compliance. It is prone to silent routing glitches — either recalculating unnecessary detours or entirely ignoring heavy truck physical blockades, behaving like a standard passenger car app. Using this on a 40-tonne truck in the EU is highly discouraged due to high risk of missing restricted signs or getting caught under low bridges.

iGO World v9.35.2.252374 64 bit — [FULLY RECOMMENDED FOR TRUCKS / TIR]
Technical note: This distribution uses a global, un-restricted Nextgen core that features full native support for heavy commercial fleet parameters. It perfectly interprets complex multi-layered HERE .ftr attribute matrices. When toll road avoidance is enabled, the routing engine correctly handles mandatory electronic truck distance tolls (e-TOLL, Toll Collect) without calculating any absurd detours. It calculates optimal, safe, and cost-efficient routes while strictly maintaining all physical vehicle restrictions (heights, weights, axle loads, and ADR)

[Only registered and activated users can see links. ]

- Regarding maps for 64-bit IGO, the same maps are used as for the 32-bit versions. All the same parameters, *. FTR is required for trucks. [Only registered and activated users can see links. ]

- FAQ speedcam for [Only registered and activated users can see links. ].

- FAQ iGO Truck [Only registered and activated users can see links. ].

- FAQ - [Only registered and activated users can see links. ].

**Brucie** · 20th November 2025, 03:53 PM

@Andrey Form
Thanks, I need Igo for trucks where you can set truck dimensions, weight etc. For now I was using Igo Israel (old 32bit) and Igo Pal (nextgen), they support truck dimensions. Igo Basar (at least old 32bit) does not. I know I can use Israel(Luna) which probably supports truck dimensions (and I will if there's no other option), but I see that for Luna you need completely different map and this map is older than normal igo map (2024q4 vs 2025q2). Two questions:
1. Does Igo Avic or Igo World support truck dimensions settings?
2. Is there any Igo Israel with 64 bit support that works with normal igo maps?

**Golom** · 20th November 2025, 05:13 PM

Luna maps are only suitable for cars (based on Mazda navigation).
AVIC supposedly supports truck navigation, but I haven't tried it myself.

**rondoan** · 21st November 2025, 08:48 AM

Most of my camper friends use iGO_World 64bit with the Wal24 skin – because this version also supports KML POIs and environmental zones.

**Andrey Form** · 21st November 2025, 08:55 AM

Using this "set" from the build by respected segaal for iGO_Basar 64-bit, we launch Weather (and possibly TMC) in iGO_Basar 64-bit (notifies via TTS) and iGO_Avic 64-bit (displays on the screen).
Instructions in the archive.

**rondoan** · 21st November 2025, 01:06 PM

I also performed this repair, including the folder, using _Avic and the Wal24 skin: it's OK.

**Boki** · 21st November 2025, 05:35 PM

Tuning Android iGO for trucks is not a simple story at all.
[Only registered and activated users can see links. ]

Apart from ux, the apk itself must support the functions.
However, I think that with the 64bit edition the biggest problem will be licenses

**rondoan** · 22nd November 2025, 09:52 AM

Check the three mentioned apps in
Menu->About->Content->Truck Info
if all *.FTR files are displayed in white (black) and not red, then *.FTR files are supported by the license.
+-+-+-+-+-+-+
[OT]
It's strange that the HERE Faroe Islands map file (2025-02) isn't supported!??
[/OT]

**Golom** · 22nd November 2025, 11:16 AM

The fact that .ftr files are recognized and appear as active does not mean that the app supports truck navigation.

This is also the case with NextGen Basarsoft.

**leleku** · 22nd November 2025, 08:45 PM

I think Segaal_mod skin for basar64(i know its just a skin) does read truck files.When planning route it does avoid forbidden zones.When i switch to car it does go true forbidden truck zones?

Thread: iGO 64-bit for Trucks [discussion]

Thread Tools

Display

iGO 64-bit for Trucks [discussion]

Advertissements

only for weather

Bookmarks

Bookmarks

Posting Permissions