Blaupunkt travelpilot 51 alpha firmware needed

**nulldevil** · 8th May 2023, 08:13 AM

Hi there!

Is there any possibility to get Blaupunkt travelpilot 51 Alpha or compatible firmware?

Spoiler: images

**Boki** · 8th May 2023, 08:32 AM

I haven't seen anywhere for this model
I think you can try compatible firmware for Modecom Freeway MX3 HD

[Only registered and activated users can see links. ]

**nulldevil** · 8th May 2023, 10:19 AM

Hi, thank you for the quick response,

Unfortunately i have already tried that firmware and it does not even run on the device, i have tried other modecom firmwares too. When trying Freeway MX4 firmware it booted from microSD to black screen and after reset it's become bricked, does not show anything on the screen.

MX3 firmware contains these files (which does not boot on this device)

Spoiler: pic 1

MX4 firmware contains these files (which does boot on this device)

Spoiler: pic 2

**Boki** · 8th May 2023, 11:12 AM

Open the device, look at the markings on the mainboard, then search according to them

**nulldevil** · 8th May 2023, 11:44 AM

Ah, very good point, thank you!

I have disassembled the device and found that it's same as
[Only registered and activated users can see links. ]

MSB2531 PND43V11

Here are some pictures of it:

Spoiler: images

**apolyps3** · 8th May 2023, 07:24 PM

It is equal or identical to the Navitel E700/MS700.
Hardware info:
[Only registered and activated users can see links. ]
Compatible firmware info:
[Only registered and activated users can see links. ]

If you want to search on your own, you should search for firmware meditek MStar 2531 Cortex A7, for instance:

Spoiler: Firmwares

**Boki** · 8th May 2023, 07:52 PM

Prestigio Geovision 5057 also. But it have smaller resolution screen.
And there is a problem if the device has a UUID ... the procedure is not so simple.

But let him try this firmware and let go further...

**nulldevil** · 8th May 2023, 10:21 PM

I can confirm that indeed the Prestigio GeoVision 5055 firmware works for this device, but there is no video output. I hear sound, can connect to it via ActiveSync and can remote control it, just no screen output at all.

**Boki** · 9th May 2023, 08:18 AM

I mentioned that they have a different screen resolution. Blaupunkt is 800x480, the listed Prestiogio's are 480*272 (whole 505x serie)
I guess firmware from [Only registered and activated users can see links. ] (MSB2531A, 800x480) will suit.
I only found it on elektroda.pl. Luckily, it's stock firmware. If he doesn't manage in the meantime, I'll upload it and post the link here later afternoon.