Thread: Zenec Z-E3726 map update problems

There is no rebrand, it is [Only registered and activated users can see links. ] device.

[Only registered and activated users can see links. ] in proper section

Try with
[Only registered and activated users can see links. ]

Good luck

Thanks for quick reply.
1. Do I need to apply the crack over my original version?
2. Which maps are compatible? I remember from years ago, there was different iGo versions with different maps.

Thank you again!

General guidance:
[Only registered and activated users can see links. ]

Since Zenec devices are specific, their (cured) software must be used

Ok, understood. Their hardware needs to have specific software. I will try it and post the result.

What about the maps? Are the 8.3 maps OK?

Another quick question: The original ZENEC card works (8GB 4 speed), the new (16GB V10) does not. Is it only the card HW, or do I need somehow change the hardware ID on the spare card?

Thank you!

You haven't read anything about maps, obviously... all the material is available on the Forum, it takes a little time and effort

iGO does not read CID ... you did something else wrong (file system?). Or the device has a limitation, which I doubt.

OK, it seems to be working, I have added some .lyc files for maps, added Q2 2022 8.3 maps and copied some required files from original ZENEC.

Now the only issue seems to be sound.
I tried this method [Only registered and activated users can see links. ]
but it does not work.
Should I replace some driver file with original Zenec? If yes, which one? Can you please point me out?

Thanks!

Michal

You cannot change or add a driver, you can only use a customized exe.
This has been discussed a lot in Zenec threads, you just have to try several packages (exe's) until you find one that works.

It is easily possible that you will have sound only with this edition:
[Only registered and activated users can see links. ]
provided it detects your receiver at all.

But, you can test it also with
[Only registered and activated users can see links. ]
or
[Only registered and activated users can see links. ]
or
[Only registered and activated users can see links. ]

Update

I received information that NextGen version 9.19.5.653580 is suitable for some Zenec devices, specifically Z-E2026 and Z-E3726
It can be used on some other devices too

So, download the software from the thread:
[Only registered and activated users can see links. ]

What is mandatory:
- replace the sys file with the attached one and add zenec's skin (zenec_c10_skypine_nextgen.zip) to the ux folder.
Remove "grid_menu_layout.zip" and "the_skin_grid_menu_layout.zip"

Add the required languages and voices, latest global_cfg, the content you want with the appropriate licenses

Rename the iGO folder to navigation and put it on the SD card (fat32). So it is activated directly by pressing the appropriate button on the device.

Spoiler: attached

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Spoiler: few screenshots

[Only registered and activated users can see links. ] [Only registered and activated users can see links. ]

Thank you, currently creating the files for SDCard. Only TT Maps are missing, I was using the HERE. Why they are reccomended? Because of Truck/Campervan data, or the complexity and accuracy?
M