Thread: 9.701 Truck navcores

For the latest 9.702 versions see my post #8 here [Only registered and activated users can see links. ]


Reposted as previous thread was "lost in migration"


Here's my current (and the latest) pre-patched 9.701 set attached to run the truck map on other devices

These are full working dumps of everything you need (not just the .cab files you get from TT.com or below) apart from the Truck map itself.

Filefactory (dlc's) attached (use Jdownloader) see [Only registered and activated users can see links. ]

Download your selected attachment from below, extract/unrar/unzip to get the .dlc file then copy to/use Jdownloader to download the actual dump folder. Then just extract/unzip/unrar that downloaded .rar, copy the contents of the extracted folder to a 4Gb SD, MicroSD or SDHC card (minimum class 4 but preferably class 6 or higher) or direct to your internal memory on a 910/920/930/940/950, copy/add your ttgo.bif file from your backup or internal memory, add the new Truck map folder (currently v956) from [Only registered and activated users can see links. ] . Then just activate the map using the latest version of FastActivate or other favourite tool to create a meta.dct AND a tmeta.dct in the map folder & activate the celebrity voices and away you go.
Remember you can have the navcore on the internal memory and the map folder on an SD card BUT ONLY on the x20/x30/x40/x50's, NOT on any older devices where they must be together (internal or SDHC card)

Only proven to work with x00, One's, One XL's incl One XL HD Traffic (NOT One XL IQ), x10, x20, x30, x40, x50's provided they have an SD/MicroSD card slot or 4GB internal memory like the 910/920/930/940/950.

Notes:

1. The version for the x20, x30, x40, x50 is just a clean/full dump of an original navcore (not just the .cab) which is suitable for these devices.

2. Specifically for the GO 700 you will need to remove the following to get this to fit on the 2.5Gb internal memory (because this was created for the non-mic 300 & 500 and therefore doesn't have the ASR folder)
2a. From the navcore:-
Vocaliser folder (no more computer voices), Helpme folder (no more straight to nearest doctor/dentist etc) and remove all but 04 & 05 (UK) voices from the voices folder.
2b. From the map itself:-
Cphoneme (used only for Loquendo & Vocaliser computer voices), Cspeech (no spoken address INPUT), crpoi (Compressed Rich Point Of Interest). No more "rich detail" (to see the "rich" detail select Navigate to ... Point of Interest ... POI near you ... select one of the built in categories ... select a POI ... If there is rich detail for that poi then a Details button appears under the phone number on the right of the screen. Click the Details button to see the the rich detail. This is often an address, web site url and email address but is technically capable of including any text and also pictures) and, if you need even more space, faces.dat & faces.met (no more polygons, lakes, forests, buildings - just roads and streets)

3. For all pre x20 models like the x00's, Ones & One XL's, 510, 710 (but NOT the 910) that were not designed to read SDHC's or have not previously seen/booted from an SDHC card, you FIRST need to load a suitable bootloader (system file) to enable the device to actually boot up from your new 4Gb SDHC Truck card. The easiest way for you to do this is to copy/paste/overwrite the "system" file (extracted from the attached TT_Bootloader_5.5120.rar) or from any of these downloaded dumps to your current standard SD card or internal memory and boot up once with that new system file THEN it will read your new SDHC card.

4. Specifically for the x10 series to reduce/minimise the possibilty of rebooting/restarting, switch the unit on BEFORE connecting to your power source.

5. And finally, if you only have 2Gb internal memory & no SD slot then your only option is to try the 2GB version attached



If you only need the official .cab (for x20/x30's) you can download it direct from [Only registered and activated users can see links. ]