Thread: Cyclop Safety Cameras for Garmin

NOTE: Look at the latest posts in this thread to find the most up-to-date files available

Cyclops go in Nuvi POI folder, or in sd/Garmin/POI

Code:

Please Login or Register to see the links

Note:Cyclops don't work on Nulink Models [other than Nuvi 169x NuLink]. See here: [Only registered and activated users can see links. ]


Ballebar's instructions about patched (unlocked) Cyclops releases in [Only registered and activated users can see links. ]. See [Only registered and activated users can see links. ] and [Only registered and activated users can see links. ]

Note there is a difference between 'unlocking' and 'decrypting' GPI files. Decrypted files will work with all devices capable of using Cyclops files. In modern MSV protected devices patching of the firmware may additionally be needed, more info in [Only registered and activated users can see links. ]. Unlocked files generally work fine on older devices without modern firmware protection but may require FID to 700 or 900 change.

To unlock, use pietu's Patch Tool or marcocq's PGFT attached below.

To decrypt, use syzygy's [Only registered and activated users can see links. ]. Sometimes decrypted files are often also loosely referred to as unlocked.

Put .gpi files in POI folder either on device or in Garmin folder on SD card.

Originally Posted by Neil

this is what i've found so far:

Models where JM generated unlock codes work with 700, 900 or 2496 FID:
2xx, 3x0, 465, 5x0, 6x0, 7xx, 8xx & 1xxx series.

Models where JM codes work only with 700 or 900 (2496 won't work):
xx, 2xxx & 3xxx. For those and releted devices change FID 2496 to either 700 or 900 and add unl code, or simply unlock the file. Use PGFT .....

[Only registered and activated users can see links. ]

This thread is designated to Cyclops Safety Cameras for Garmin. Other kind of safety cameras for Garmin could be found by a TAG search - safety cameras for garmin - GPSPower.net or
in Speedcams Index:
[Only registered and activated users can see links. ]

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE: Sometimes the files for individual countries or regions are many weeks 'behind' the official release date. If no new camera data is available from Cyclops then Garmin doesn't 'update' the earlier dated GPI files in it's subsequent releases, other than as explained below for AU_NZ and EEU:

Australia, New Zealand, Czech Republic, Hungary, Poland, Romania & Slovakia users please note:
Files for AU/NZ and Eastern EU are NOT updated with every release.
This is despite them always appearing to be so updated going by the release date [as shown above]. It's a Garmin compiling bug, long ongoing and uncorrected. [it's actually Slovakia, not Slovenia that's packaged with the Eastern Europe file - someone can't spell, you'll find the genuine Slovenia with Italy].


NOTE: Look at the latest posts in this thread to find the most up-to-date files available