[Only registered and activated users can see links. ]
Ok I prepared everything for you.
[Only registered and activated users can see links. ]
Inside of Cure DNX9X40_360.rar you have:
1 Cure
2 Install_RMPrepUSB_Full
3 Original
4 Copy back folder garmin
You can connect only the GPS module to PC USB port in Pre Boot mode, without the mount gps module back in the unit Kenwood
Use firmware Cure, then format the memory in FAT32 with RMPrepUSB.
After formatting copy back folder Garmin with everything it in he.
After copy, use firmware Original
And finally, reassemble everything back
Good luck
Bookmarks